They are currently in LocApiv02, which is incorrect. SystemStatus
shouldn't be referenced at this layer. And both of these two calls
are specific to GnssAdapter use cases too.
Change-Id: I7098e3963be163199a833a8fb6b12a100405f71e
CRs-Fixed: 2090442
1. Validity bit for vertical uncertainity was conflicting
with the validity bit of location source, hence had
to change the bit.
2. Modify ZPP API to report speed and bearing accuracy.
CRs-Fixed:2064017
Change-Id: I8b09ecab3d67557ad7c2451fee71dbc0e1f14371
Implementation of LocationAPI into gps hal
to be a common API that is called into by platform
specific APIs.
Change-Id: Ie5a7bd217d4ae2175ad49e6aca2fb6ecd4702f3b
CRs-fixed: 1112712
Remove all usage of gps.h and fused_location.h
from all gnss models except gps/fpl hal librarys
Change-Id: I90ba233c6bbe5c31a4cacceeb981833719c871f2
CRs-Fixed: 1067953
On SSR invoke dsi_release() and dsi_init(Mode_SSR) to recover
data call functionality post SSR.
Change-Id: Ie784dad73ae8d6d91cf4cb87efe938af9015a7a2
CRs-Fixed: 1073101
When SV report comes, mark used_in_fix based on the most recent
position report.
Change-Id: I98f3f4e7836de86f9025bae446cdeac6d1eb5862
CRs-Fixed: 1080013
Part of overall Combo Provider 2.0 changes.
This fix changes getBestWwanPosition API from
sync to async, as the QMI API used can now take
longer to produce a position
CRs-fixed: 994048
Change-Id: I5654f9ab417ffea86ed8653731df1ca47cf7e733
Fixed SSR (sub-system reset) issue when
GNSS Measurements where not available
after an SSR.
Change-Id: Ie9ecc851fe53814f4a3e386b503b61bbca9d156d
CRs-fixed: 1036070
Add two new configuration parameters for LPPe, one
to configure technologies for LPPe in Control-Plane and one
to configure technologies for LPPe in User-Plane
Crs-Fixed: 974312
Change-Id: If664a6dc90a993171ca1221f074ecc1ecd06a106
merge automotive specific changes from LA.AF.1.2.1 into
location development branch
Change-Id: I90a5e60c46bb5b1aafaf4cd9aaf2dcb79449f288
CRs-Fixed: 1017254
sentences required.
If NMEA_PROVIDER=1, HLOS needs to use the QMI type
QMI_LOC_SET_NMEA_TYPES to set the type of NMEA
sentences it needs. This will register for all
possible NMEA sentences and instructs modem to
send whatever it supports.
Change-Id: I3a9e2219c1c9b4ca127a4b55f71b0a78a84cdd11
CRs-Fixed: 1005413 1006831
The used-in-fix mask is only keeping track
of GPS SVs, so add a used-in-fix mask for
GlONASS SVs and BDS SVs as well to avoid
NMEA generation issues
CRs-fixed: 826152
Change-Id: I33862cf8d40db1d667179ef68d18703edc359843
GpsLocation object need to be cleared in case
the base calss member function being called so
that no bad values will be passed up.
Change-Id: I224ecebb3e4137c1baddd99ce0211a0f60d3e5b4
CRs-fixed: 879356
The used-in-fix mask is only keeping track
of GPS SVs, so add a used-in-fix mask for
GlONASS SVs and BDS SVs as well to avoid
NMEA generation issues
CRs-fixed: 826152
Change-Id: I33862cf8d40db1d667179ef68d18703edc359843
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlTQKUkACgkQoUgPZYCpAfGAUgCgyH0kEyUtVhZ09+T3w4VfnZqK
Id8An3JkWK9QhlXZ9Q2zT8T7LR5/T2ls
=8mx/
-----END PGP SIGNATURE-----
Merge tag 'AU_LINUX_ANDROID_LA.AF.1.1.05.00.02.164.175' into 111
AU_LINUX_ANDROID_LA.AF.1.1.05.00.02.164.175 based on quic/aosp/LA.AF.1.1
* tag 'AU_LINUX_ANDROID_LA.AF.1.1.05.00.02.164.175':
GNSS measurement
Added new events and masks for GDT AP
gps.conf parameters are in sap.conf table
Enable "auto" target for APQ8960 Automotive ADP platform
support reinjecting supl url for sim hot swap
Remove Redundant Log
Report 2D speed rather than 3D speed.
Conflicts:
core/gps_extended_c.h
Change-Id: Ibe1207ac07a2931003f5fa34ae68d8c1e6512eeb
Change Summary:
* Changes taken from change#812357;
* Structure definitions for GNSS SV Measurement and GNSS SV
Polynomial to report it to ULP and to external DR module;
* New function additions in LocApiBase, LocAdapterBase and
LocEngAdapter to report SV Measurement and SV Polynomial;
* definition and changes to detect "auto" platform in loc_target;
* enable SV Measurement and SV Polynomial report for "auto"
platform;
Change-Id: I5ac5ee5c44e72e657b16515e37637c9a5c64e638
Implementation of GNSS Measurements support.
In GPS HAL, Only GPS Measurements report
will be collected from modem.
CRs-fixed: 771496
Change-Id: Ief4368099df4ff573ad1a764f4156d63685e936d
This change removes redundant log
printing, including SV info and
position report.
Change-Id: Ifcf827f73e6c940e3fcb93402bc7a4b22e9a9d4e
CRs-fixed: 765333
GPS_LOCK is defined as a bit mask in the higher layer
defined in gps.conf. GPS HAL reads from gps.conf, yet
this can be reconfigured by gps.h defined new API to
a different value. The current value will be used at
cleanup() time, to optionally lock gps modem to the
configured mode.
This changs also sets SUPL URL to NULL if hostname
comes with set_server() API is a NULL string.
Also optimized configuration_update() implementation
so that no all items will go through the reconfigu
scan.
Also added SUPL_MODE as a parameter in gps.conf which
can be uncommented to over-write the value from config.xml.
This can be used for testing purposes
Bug: 16131208
Bug: 17288144
CRs-fixed: 736966
Change-Id: I12a89b12ff82b6efd7b5567d2fcd6a7e79414c71
When device boots up, get a list of message
supported by modem, based on which some adapeters
will be able to update register masks.
CRs-fixed: 601349
Change-Id: I6af282f8e551f1f3c6bf8795e968fdbc7b0a9fa3
A new QMI LOC msg is introduced which injects into
the modem a value that determines whether or not
the version of XTRA is to be checked
Change-Id: I0ef579332d064713ce73d80e66dc8c6fef1c1638
CRs-fixed: 649860
Changes for enabling Zero Power positioning feature in the
location services subsystem.It involves modifications to
HAL and ULP engine.
CRs-Fixed: 457060
Change-Id: I62187e66d44c5b40e1b2a41cafc0cb3e7c94f6d8
Added new module liblbs_core to make
LocApiV02 independent of pre-built binaries.
This patch provies the necessary changes to
support the new module
CRs-fixed: 538124
Change-Id: I716cf169de9dae164a141651af971793099a927d
Added get zpp fix API so that different other features can
make use of this feature in the AP space.
Change-Id: I32e750626704c5d0069723ee1ca949fda4a5505e
Changes to ensure the code breaks out of the adapter session
check loop once any one of them is in session.
Change-Id: I73b3a5f4954050abf5ce3d4c5a04245c894725f2
CRs-Fixed: 534811
ULP will no longer be loaded and init'ed from loc eng
HAL. GPS HAL will look for ULP once it completes init
and waits for a msg back once it hears from ULP. This
is done with introduction of UlpProxy. Default proxy
is a no op proxy.
Change-Id: If0be0b5744f9de20f12c2f0b9704dea66aa454c0
(cherry picked from commit 2eb4ddcae94283df6c6be450c4c070ffd8ff9cd7)
