Change Summary:
* Changes taken from change#812357;
* Structure definitions for GNSS SV Measurement and GNSS SV
Polynomial to report it to ULP and to external DR module;
* New function additions in LocApiBase, LocAdapterBase and
LocEngAdapter to report SV Measurement and SV Polynomial;
* definition and changes to detect "auto" platform in loc_target;
* enable SV Measurement and SV Polynomial report for "auto"
platform;
Change-Id: I5ac5ee5c44e72e657b16515e37637c9a5c64e638
Implementation of GNSS Measurements support.
In GPS HAL, Only GPS Measurements report
will be collected from modem.
CRs-fixed: 771496
Change-Id: Ief4368099df4ff573ad1a764f4156d63685e936d
due to merge issue, some of the parameters to come out
from gps.conf are placed in the table that expects from
sap.conf. Moving them into the right place.
Change-Id: Ice988b06d0d87bdbc0225296898d6aaad701743f
CRs-Fixed: 760152
modem might reset during sim hot swap, in which case
the prior supl url shall be remembered so that can be
reinjected. This change enables it.
CRs-fixed: 771493
Change-Id: I86ec898a54bc8706720c29a1ea67ce27153ee981
This change removes redundant log
printing, including SV info and
position report.
Change-Id: Ifcf827f73e6c940e3fcb93402bc7a4b22e9a9d4e
CRs-fixed: 765333
According to Android API standard, it should be only the
horizontal speed. Therefore, the speed should be reported
in 2D rather than 3D.
Change-Id: Ie42aa350637b56394869bac0af0207a5aceeede6
CRs-fixed: 745419
GpsLocationProvider gets SUPL_MODE, and passes is to
GPS HAL along with other configs upon sim hot swap.
GPS HAL needs to parse it out and factor in that
information in for ULP so that ULP can make correct
decision w.r.t. position mode when gnss positioning
is needed.
Change-Id: I1a14dd9d9e47b5d7ea072ae08ee99bbb7c69dbe0
CRs-Fixed: 749794
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlRGYwkACgkQoUgPZYCpAfF2rwCg5quG/L+pzo5R94uD/QSR1Xs6
mpsAoIxxW/ftz0uMbp67UANrb7EQyVNY
=eKHq
-----END PGP SIGNATURE-----
Merge tag 'AU_LINUX_ANDROID_KK.04.04.04.010.214' into HEAD
AU_LINUX_ANDROID_KK.04.04.04.010.214 based on quic/aosp/kk
Change-Id: Ida51fa96a5a39fcb3bb2f2c6ab9be84a3ec44d41
when the device boots with gps disabled in settings and
later enabled post pwoer up, the lock state doesn't get
updated correctly.
Bug: 16131208
CRs-fixed: 736966
Change-Id: Ice8237a3fd67740819de573ffebbab851363163d
there is an implicit requirement on the loc_gps_cfg_s_type field
data type, that is they must be 32 bit fields. Otherwise it would
only work with the assistance of padding. When two adjacent 8 bit
fields are defined, the later filled field would overwrite the
previously written neighbor. This is why GPS_LOCK was tested as
broken in the latest build.
This also fixes a theoretic bug that when there are two of the
same fields defined in the config table to be filled, the
accounting of the filled entries was incorrect earlier. This is
not a realistic bug, as there are no idential entries in the
config table HAL fills.
Bug: 16131208
CRs-fixed: 736966
Change-Id: I2e262fb30272f6f334508df17bb640022d7b1ef5
GPS_LOCK is defined as a bit mask in the higher layer
defined in gps.conf. GPS HAL reads from gps.conf, yet
this can be reconfigured by gps.h defined new API to
a different value. The current value will be used at
cleanup() time, to optionally lock gps modem to the
configured mode.
This changs also sets SUPL URL to NULL if hostname
comes with set_server() API is a NULL string.
Also optimized configuration_update() implementation
so that no all items will go through the reconfigu
scan.
Also added SUPL_MODE as a parameter in gps.conf which
can be uncommented to over-write the value from config.xml.
This can be used for testing purposes
Bug: 16131208
Bug: 17288144
CRs-fixed: 736966
Change-Id: I12a89b12ff82b6efd7b5567d2fcd6a7e79414c71
currently HAL does not allow gps paremeter reconfiguration
before HAL init. This change allows that. The new config
items will be cached only. Upon HAL init, the parameters
that interest modem will be injected.
Bug: 17110478
CRs-fixed: 736966
Change-Id: Ie8d180a0ed6a35776f1ee0342f88dfc010ec2746
Some of the parameters configured in gps.conf may be
carrier dependent. This provides a mechanism so that
GpsLocationProvider can determine current operator
resolve of the carrier specific configurations and
update HAL with those configurations post init.
Bug: 17110478
CRs-fixed: 736966
Change-Id: I80aa4404da7666824335fee074dae2ffcba40548
To prevent reading beyond the length of
the buffer that contains XTRA data, a
check has been introduced assuming an
approximate limit for the size of the
data
Change-Id: I7e05beadec76c3308448b9198fd23c8e8b97394d
CRs-fixed: 420623
Added run time detection of PDS enabled fusion target
to loc_target(), to support fusion platforms that has
PDS service enabled.
Change-Id: Ic53df027540f00eec9259776351b6bbc9afa0521
CRs-Fixed: 699757
When device boots up, get a list of message
supported by modem, based on which some adapeters
will be able to update register masks.
CRs-fixed: 601349
Change-Id: I6af282f8e551f1f3c6bf8795e968fdbc7b0a9fa3
When device boots up, get a list of message
supported by modem, based on which some adapeters
will be able to update register masks.
CRs-fixed: 601349
Change-Id: I6af282f8e551f1f3c6bf8795e968fdbc7b0a9fa3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlQizM8ACgkQoUgPZYCpAfH5yQCgmx8aSsNKN3FRVfYiXQK8Zq7i
9FkAn0tDuuuy3sib/8fh/S+VCU/l8UKI
=VC4+
-----END PGP SIGNATURE-----
Merge tag 'AU_LINUX_ANDROID_KK.04.04.04.010.171' into HEAD
AU_LINUX_ANDROID_KK.04.04.04.010.171 based on quic/aosp/kk
Change-Id: Ieeb7a3b116fd4ac9091582b40de5a9c468ca68ea
Added a new gps.conf parameter which can
be used to decide whether or not to use
data services to bring up call using emergency
PDN or use default SUPL PDN
Change-Id: I604a1489e66339eb2c27019dafab640f7a15cd84
CRs-fixed: 685639
