311fea04b5
Add ini "ignore_fw_reg_offload_ind" to ignore regulatory offload indicatin from fw. Change-Id: Ie45bc35455efb4b3fd3512bafe140d4ae9580c4b CRs-Fixed: 2542055 Signed-off-by: SamarV-121 <samarvispute121@gmail.com>
700 lines
18 KiB
INI
700 lines
18 KiB
INI
# This file allows user to override the factory
|
|
# defaults for the WLAN Driver
|
|
|
|
# Enable IMPS or not
|
|
gEnableImps=1
|
|
|
|
# Enable BMPS or not
|
|
gEnableBmps=1
|
|
|
|
# Phy Mode (auto, b, g, n, etc)
|
|
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
|
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
|
# 7 = 11b only 8 = 11ac only.
|
|
gDot11Mode=0
|
|
|
|
# Assigned MAC Addresses - This will be used until NV items are in place
|
|
# Each byte of MAC address is represented in Hex format as XX
|
|
Intf0MacAddress=000AF58989FF
|
|
Intf1MacAddress=000AF58989FE
|
|
Intf2MacAddress=000AF58989FD
|
|
Intf3MacAddress=000AF58989FC
|
|
|
|
# UAPSD service interval for VO,VI, BE, BK traffic
|
|
InfraUapsdVoSrvIntv=0
|
|
InfraUapsdViSrvIntv=0
|
|
InfraUapsdBeSrvIntv=0
|
|
InfraUapsdBkSrvIntv=0
|
|
|
|
# Flag to allow STA send AddTspec even when ACM is Off
|
|
gAddTSWhenACMIsOff=1
|
|
|
|
#Flag to enable HostARPOffload feature or not
|
|
hostArpOffload=1
|
|
|
|
#Flag to enable HostNSOffload feature or not
|
|
hostNSOffload=1
|
|
|
|
# 802.11n Protection flag
|
|
gEnableApProt=1
|
|
|
|
#ifndef VENDOR_EDIT
|
|
#Qiulei@PSW.CN.WiFi.Power.1116749,2017/09/22
|
|
#Modify for wifi softap standby current
|
|
#gEnableApOBSSProt=1
|
|
#else /* VENDOR_EDIT */
|
|
gEnableApOBSSProt=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#Enable/Disable UAPSD for SoftAP
|
|
gEnableApUapsd=1
|
|
|
|
# Fixed Rate
|
|
gFixedRate=0
|
|
|
|
# Maximum Tx power
|
|
# gTxPowerCap=30
|
|
|
|
# Fragmentation Threshold
|
|
# gFragmentationThreshold=2346
|
|
|
|
# RTS threshold
|
|
RTSThreshold=1048576
|
|
|
|
# Intra-BSS forward
|
|
gDisableIntraBssFwd=0
|
|
|
|
# WMM Enable/Disable
|
|
WmmIsEnabled=0
|
|
|
|
# 802.11d support
|
|
g11dSupportEnabled=0
|
|
|
|
# 802.11h support
|
|
g11hSupportEnabled=1
|
|
|
|
# DFS Master Capability
|
|
#ifndef VENDOR_EDIT
|
|
#Guotian.Wu@PSW.CN.WiFi.Basic.SoftAP.1190360, 2019/5/23,
|
|
#change for SoftAP cannot operate on DFS channel
|
|
#gEnableDFSMasterCap=1
|
|
#else /* VENDOR_EDIT */
|
|
gEnableDFSMasterCap=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
# ESE Support and fast transition
|
|
EseEnabled=0
|
|
|
|
ImplicitQosIsEnabled=0
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Botao.Cu@PSW.CN.WiFi.Connect.select.1064666, 2017/01/04,
|
|
#add for select 5G wifi preferentially
|
|
#gNeighborLookupThreshold=76
|
|
#endif /* VENDOR_EDIT */
|
|
gNeighborScanChannelMinTime=20
|
|
gNeighborScanChannelMaxTime=30
|
|
gMaxNeighborReqTries=3
|
|
|
|
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
|
# To enable, set FastRoamEnabled=1
|
|
# To disable, set FastRoamEnabled=0
|
|
FastRoamEnabled=1
|
|
|
|
# Check if the AP to which we are roaming is better than current AP in
|
|
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
|
# use this value as to how better the RSSI of the new/roamable AP should
|
|
# be for roaming
|
|
#ifndef VENDOR_EDIT
|
|
#Botao.Cu@PSW.CN.WiFi.Connect.roaming.1065694, 2016/07/06
|
|
#modify for [C18]: modify the roaming value.
|
|
#RoamRssiDiff=5
|
|
#else VENDOR_EDIT
|
|
RoamRssiDiff=8
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Botao.Cu@PSW.CN.WiFi.Connect.select.1064666, 2017/01/04,
|
|
#add for select 5G wifi preferentially
|
|
gRoamPrefer5GHz=1
|
|
gSelect5GHzMargin=5
|
|
|
|
#set roam_bad_rssi_thresh_offset_2g = 0, avoid background roaming roam from 2g to 5g
|
|
# RSSI threshold offset for 2G to 5G roam
|
|
roam_bad_rssi_thresh_offset_2g=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#Add for dense roam
|
|
gtraffic_threshold=55
|
|
groam_dense_rssi_thresh_offset=0
|
|
|
|
gNeighborLookupThreshold=80
|
|
#add for roam scan diff
|
|
gRoamRescanRssiDiff=3
|
|
#add for disable background scan roam
|
|
roam_bg_scan_client_bitmap=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
|
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
|
gRoamIntraBand=0
|
|
|
|
#Short Guard Interval Enable/disable
|
|
gShortGI20Mhz=1
|
|
gShortGI40Mhz=1
|
|
|
|
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
|
gAPAutoShutOff=0
|
|
|
|
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
|
gWlanAutoShutdown = 0
|
|
|
|
# Not used.
|
|
gApAutoChannelSelection=0
|
|
|
|
#Preferred band (both or 2.4 only or 5 only)
|
|
BandCapability=0
|
|
|
|
#Channel Bonding
|
|
gChannelBondingMode5GHz=1
|
|
|
|
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
|
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
|
#is idle for last 10 seconds.) For both active and power save clients.
|
|
|
|
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
|
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
|
|
|
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
|
#success still we try on 11th second if not tries on 12th and so on till 15th
|
|
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
|
#case DUT will detect client got removed in (10+5) seconds.
|
|
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
|
|
|
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
|
#it is period where we send NULL frame.
|
|
#gApLinkMonitorPeriod = 10
|
|
#gGoLinkMonitorPeriod = 10
|
|
|
|
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
|
#are succeed to send or not. Hence total effective detection time is
|
|
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
|
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
|
gGoKeepAlivePeriod = 20
|
|
gApKeepAlivePeriod = 20
|
|
|
|
#If set will start with active scan after driver load, otherwise will start with
|
|
#passive scan to find out the domain
|
|
gEnableBypass11d=1
|
|
|
|
#If set to 0, will not scan DFS channels
|
|
gEnableDFSChnlScan=1
|
|
|
|
# Enable DFS channel roam
|
|
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
|
gAllowDFSChannelRoam=1
|
|
|
|
gVhtChannelWidth=2
|
|
|
|
# Enable Generic Receive Offload
|
|
# LRO and GRO are exclusive to each other
|
|
# LRO support is deprecated on latest 4.9(SDM845) kernel
|
|
#ifndef VENDOR_EDIT
|
|
#Rongzheng.tang@PSW.CN.WiFi.Network.1389443, 2019/05/23
|
|
#GROEnable=1
|
|
#else
|
|
GROEnable=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#Data Inactivity Timeout when in powersave (in ms)
|
|
gDataInactivityTimeout=200
|
|
|
|
# Set txchainmask and rxchainmask
|
|
# These parameters are used only if gEnable2x2 is 0
|
|
# Valid values are 1,2
|
|
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
|
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
|
gSetTxChainmask1x1=1
|
|
gSetRxChainmask1x1=1
|
|
|
|
# Scan Timing Parameters
|
|
# gPassiveMaxChannelTime=110
|
|
# gPassiveMinChannelTime=60
|
|
#ifdef VENDOR_EDIT
|
|
#Botao.Cu@PSW.CN.WiFi.Connect.Scan.958144, 2017/04/20,
|
|
#Modify for enlarge scan result
|
|
#gActiveMaxChannelTime=40
|
|
#gActiveMinChannelTime=20
|
|
#else
|
|
gActiveMaxChannelTime=60
|
|
gActiveMinChannelTime=40
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#If set to 0, MCC is not allowed.
|
|
gEnableMCCMode=1
|
|
|
|
# MCC to SCC Switch mode:
|
|
# 0-Disable
|
|
# 1-Enable
|
|
# 2-Force SCC if same band, with SAP restart
|
|
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
|
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
|
# without SAP restart by sending (E)CSA
|
|
gWlanMccToSccSwitchMode=3
|
|
|
|
# 1=enable STBC; 0=disable STBC
|
|
gEnableRXSTBC=1
|
|
|
|
# 1=enable tx STBC; 0=disable
|
|
gEnableTXSTBC=1
|
|
|
|
# 1=enable rx LDPC; 0=disable
|
|
gEnableRXLDPC=1
|
|
|
|
#Enable/Disable Tx beamforming
|
|
gTxBFEnable=1
|
|
|
|
#Enable/Disable Tx beamformee in SAP mode
|
|
gEnableTxBFeeSAP=1
|
|
|
|
# Enable Tx beamforming in VHT20MHz
|
|
# Valid values are 0,1. If commented out, the default value is 0.
|
|
# 0=disable, 1=enable
|
|
gEnableTxBFin20MHz=1
|
|
|
|
#Enable/Disable SU Tx beamformer support.
|
|
gEnableTxSUBeamformer=1
|
|
|
|
gEnableFastRoamInConcurrency=1
|
|
|
|
#Maxium Channel time in msec
|
|
gMaxMediumTime = 6000
|
|
|
|
# 802.11K support
|
|
gRrmEnable=1
|
|
|
|
|
|
|
|
#Enable firmware uart print
|
|
gEnablefwprint=0
|
|
|
|
# Firmware log mode
|
|
# Valid values are 0,1,2
|
|
# 0=Disable, 1=WMI, 2=DIAG
|
|
gEnablefwlog=1
|
|
|
|
# Maximum Receive AMPDU size (VHT only. Valid values:
|
|
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
|
gVhtAmpduLenExponent=7
|
|
|
|
# Maximum MPDU length (VHT only. Valid values:
|
|
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
|
gVhtMpduLen=2
|
|
|
|
# Maximum number of wow filters required
|
|
#gMaxWoWFilters=22
|
|
|
|
# WOW Enable/Disable.
|
|
# 0 - Disable both magic pattern match and pattern byte match.
|
|
# 1 - Enable magic pattern match on all interfaces.
|
|
# 2 - Enable pattern byte match on all interfaces.
|
|
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
|
# Default value of gEnableWoW is 3.
|
|
# gEnableWoW=0
|
|
|
|
# Enable or Disable MCC Adaptive Scheduler at the FW
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMCCAdaptiveScheduler=1
|
|
|
|
#Enable or Disable p2p device address administered
|
|
isP2pDeviceAddrAdministrated=0
|
|
|
|
# Remove Overlap channel restriction
|
|
gEnableOverLapCh=0
|
|
|
|
#Enable VHT on 2.4Ghz
|
|
gEnableVhtFor24GHzBand=1
|
|
|
|
#Maximum number of offload peers supported
|
|
# gMaxOffloadPeers=2
|
|
|
|
# controlling the following offload patterns
|
|
# through ini parameter. Default value is 1
|
|
# to disable set it to zero. ssdp = 0
|
|
# Setup multicast pattern for mDNS 224.0.0.251,
|
|
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
|
ssdp=0
|
|
|
|
#Enable Memory Deep Sleep
|
|
gEnableMemDeepSleep=1
|
|
|
|
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
|
gRegulatoryChangeCountry=1
|
|
|
|
# RA filtering rate limit param, the current value would not
|
|
# help if the lifetime in RA is less than 3*60=3min. Then
|
|
# we need to change it, though it is uncommon.
|
|
# gRAFilterEnable=0
|
|
gRArateLimitInterval=600
|
|
|
|
# Maximum number of concurrent connections
|
|
gMaxConcurrentActiveSessions=3
|
|
|
|
# Disable/Enable GreenAP
|
|
# 0 to disable, 1 to enable, default: 1
|
|
gEnableGreenAp=0
|
|
|
|
# Radar PRI multiplier
|
|
gDFSradarMappingPriMultiplier=4
|
|
|
|
gPNOScanSupport=1
|
|
|
|
#Enable/Disable LPASS support
|
|
# 0 to disable, 1 to enable
|
|
gEnableLpassSupport=1
|
|
|
|
# Whether userspace country code setting shld have priority
|
|
gCountryCodePriority=1
|
|
|
|
# Enable(1)/Disable(0) SIFS burst
|
|
gEnableSifsBurst=1
|
|
|
|
# Enable or Disable Multi-user MIMO
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMuBformee=1
|
|
|
|
# Enable/Disable channel avoidance for SAP in SCC scenario
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gSapSccChanAvoidance=0
|
|
|
|
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
|
gIbssTxSpEndInactivityTime=10
|
|
|
|
# Enable support for TDLS
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gEnableTDLSSupport=1
|
|
|
|
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
|
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
|
# and RSSI) is met and then will initiate teardown when teardown criteria
|
|
# (idle packet count and RSSI) is met.
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gEnableTDLSImplicitTrigger=1
|
|
|
|
# Enable TDLS External Control. That is, user space application has to
|
|
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
|
# Device will establish TDLS only towards those configured peers whenever
|
|
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
|
# when teardown criteria (idle packet count and RSSI) is met. However,
|
|
# device will accept TDLS connection if it is initiated from any other peer,
|
|
# even if that peer is not configured.
|
|
# 0 - disable
|
|
# 1 - enable
|
|
# For TDLS External Control, Implicit Trigger must also be enabled.
|
|
gTDLSExternalControl=1
|
|
|
|
# Enable support for TDLS off-channel operation
|
|
# 0 - disable
|
|
# 1 - enable
|
|
# TDLS off-channel operation will be invoked when there is only one
|
|
# TDLS connection.
|
|
gEnableTDLSOffChannel=1
|
|
|
|
# Enable or Disable Random MAC (Spoofing)
|
|
# 1=Enable, 0=Disable (default)
|
|
gEnableMacAddrSpoof=1
|
|
|
|
################ Datapath feature set Begin ################
|
|
# Bus bandwidth threshold values in terms of number of packets
|
|
gBusBandwidthHighThreshold=2000
|
|
gBusBandwidthMediumThreshold=500
|
|
gBusBandwidthLowThreshold=150
|
|
|
|
# Bus bandwidth compute timeout value in ms
|
|
gBusBandwidthComputeInterval=100
|
|
|
|
# VHT Tx/Rx MCS values
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gVhtRxMCS=2
|
|
gVhtTxMCS=2
|
|
|
|
# VHT Tx/Rx MCS values for 2x2
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gEnable2x2=1
|
|
gVhtRxMCS2x2=2
|
|
gVhtTxMCS2x2=2
|
|
|
|
#IPA config is a bit mask and following are the configurations.
|
|
#bit0 IPA Enable
|
|
#bit1 IPA PRE Filter enable
|
|
#bit2 IPv6 enable
|
|
#bit3 IPA Resource Manager (RM) enable
|
|
#bit4 IPA Clock scaling enable
|
|
#bit5 IPA uC ENABLE
|
|
#bit6 IPA uC STA ENABLE
|
|
#bit8 IPA Real Time Debugging
|
|
gIPAConfig=0x7d
|
|
gIPADescSize=800
|
|
|
|
# Enable/Disable RX full reorder offload
|
|
gReorderOffloadSupported=1
|
|
|
|
# Enable CE classification
|
|
# 1 - enable(default) 0 - disable
|
|
gCEClassifyEnable=1
|
|
|
|
# Enable Rx handling options
|
|
# Rx_thread=1 RPS=2(default for ROME) NAPI=5
|
|
rx_mode=5
|
|
|
|
# Enable(Tx) fastpath for data traffic.
|
|
# 1 - enable(default) 0 - disable
|
|
gEnableFastPath=1
|
|
|
|
# This flag enables IP, TCP and UDP checksum offload
|
|
# 1 - enable(default) 0 - disable
|
|
gEnableIpTcpUdpChecksumOffload=1
|
|
|
|
# Enable TCP Segmentation Offload
|
|
# 1 - enable 0 - disable
|
|
TSOEnable=1
|
|
|
|
# Enable HT MPDU Density
|
|
# 4 for 2 micro sec
|
|
ght_mpdu_density=4
|
|
|
|
# Enable flow steering to enable multiple CEs for Rx flows.
|
|
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
|
# Parallel Rx paths.
|
|
# 1 - enable 0 - disable(default)
|
|
gEnableFlowSteering=1
|
|
|
|
# Time in microseconds after which a NAPI poll must yield
|
|
ce_service_max_yield_time=500
|
|
|
|
#Maximum number of HTT messages to be processed per NAPI poll
|
|
ce_service_max_rx_ind_flush=1
|
|
|
|
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
|
maxMSDUsPerRxInd=8
|
|
|
|
################ Datapath feature set End ################
|
|
|
|
################ NAN feature set start ###################
|
|
|
|
# Enable NAN discovery (NAN 1.0)
|
|
# 1 - enable 0 - disable(default)
|
|
gEnableNanSupport=1
|
|
genable_nan_datapath=1
|
|
################ NAN feature set end #####################
|
|
|
|
#ifndef VENDOR_EDIT
|
|
#Shimin.Jiang@PSW.CN.WiFi.Connect.Scan.1405517,2018/5/31
|
|
#Modify for disable adaptive dwell scan mode
|
|
#adaptive_dwell_mode_enabled=1
|
|
#else
|
|
adaptive_dwell_mode_enabled=0
|
|
#endif /*VENDOR_EDIT*/
|
|
|
|
hostscan_adaptive_dwell_mode=1
|
|
|
|
adapt_dwell_lpf_weight=80
|
|
|
|
adapt_dwell_wifi_act_threshold=10
|
|
|
|
enable_scoring_for_roam=1
|
|
|
|
oce_enable_probe_req_deferral=1
|
|
|
|
oce_enable_probe_req_rate=1
|
|
|
|
enable_esp_for_roam=1
|
|
##################### Scoring Param ###############
|
|
esp_qbss_score_idx7_to_4=0000000A
|
|
|
|
#Add another interface while driver load
|
|
gEnableConcurrentSTA=wlan1
|
|
|
|
#Enable Target Wake Time support
|
|
enable_twt=0
|
|
|
|
# This ini is used to set early stop scan. Early stop
|
|
#scan is a feature for roaming to stop the scans at
|
|
#an early stage as soon as we find a better AP to roam.
|
|
#This would make the roaming happen quickly.
|
|
gEnableEarlyStopScan=1
|
|
|
|
#This ini is used to increase/decrease PCL weightage in best candidate selection.
|
|
#If some APs are in PCL list, those AP will get addition weightage.
|
|
pcl_weightage=0
|
|
|
|
#Currently Firmware update the sequence number for each TID with
|
|
#because of security issues. But with this PN mechanism, throughput drop
|
|
#is observed. With this ini FW takes the decision to trade off between
|
|
#security and throughput
|
|
gcmp_enabled=0
|
|
|
|
gTxBFCsnValue=4
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Pan.Zhang@PSW.CN.WiFi.Basic.Log.1072015, 2017/11/23,
|
|
#Add for enable Packet Log
|
|
gEnablePacketLog=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#genglin.lian@PSW.CN.WiFi.Connect.Scan.1975483, 2019/05/01,
|
|
# 0 - disable
|
|
# 1 - enable
|
|
#Disallow the beacons/probe resp from adjacent channels
|
|
allow_adj_chan_bcns=0
|
|
|
|
#Shimin.Jiang@PSW.CN.WiFi.Connect.dhcp.1037520, 2017/07/07,
|
|
#Add for some ap don't response to dhcp discovery paket with qos flag equals voice
|
|
arp_ac_category=0
|
|
#Yadong.Hu@Connectivity.WiFi.Connect.disconnect.956254, 2017/04/20,
|
|
#Add for set value of kick out, 2047 means if DUT missed 2047 packets from AP, then disconnect
|
|
gDroppedPktDisconnectTh=2047
|
|
|
|
#Add for set value of beacon miss, 10 and 20 means 30 beacon miss,then maybe trigger disconnect
|
|
gRoamBmissFirstBcnt=10
|
|
gRoamBmissFinalBcnt=20
|
|
|
|
#Xiao.Li@PSW.CN.WiFi.Network.internet.1445969, 2018/06/26,
|
|
#Modify for set min channel time and max channel time during SCO/eSCO
|
|
gActiveMinChannelTimeBtc=120
|
|
gActiveMaxChannelTimeBtc=180
|
|
|
|
#Jie.Huang@PSW.CN.WiFi.AutoConnect.1882408 2019/03/13
|
|
#Add for : bug 1882408 do not automatically connect strong signal hotspots
|
|
gEnableSNRMonitoring=0
|
|
|
|
#Yuan.Huang@PSW.CN.WiFi.Network.quality.1063633 2016/07/20,
|
|
#Add for optimize download performance in noisy env.
|
|
gEnableEdcaParams=0
|
|
gEdcaVoCwmin=2
|
|
gEdcaViCwmin=2
|
|
gEdcaBkCwmin=2
|
|
gEdcaBeCwmin=2
|
|
|
|
gEdcaVoCwmax=3
|
|
gEdcaViCwmax=3
|
|
gEdcaBkCwmax=3
|
|
gEdcaBeCwmax=3
|
|
|
|
gEdcaVoAifs=0
|
|
gEdcaViAifs=0
|
|
gEdcaBkAifs=0
|
|
gEdcaBeAifs=0
|
|
|
|
#Rongzheng.tang@Connectivity.Wifi.Network.1063609, 2017/03/30,
|
|
#Add for enable PER based roaming
|
|
# enabled for Tx and Rx traffic
|
|
gper_roam_enabled=3
|
|
|
|
# Mbps x 10
|
|
gper_roam_high_rate_th=540
|
|
gper_roam_low_rate_th =150
|
|
|
|
# high PER rate % for roaming scan triggered
|
|
gper_roam_th_percent=80
|
|
gper_roam_rest_time=60
|
|
|
|
#Yuan.Huang@PSW.CN.WiFi.Network.internet.1064218, 2016/08/04,
|
|
#Modify for QQ message delays when DUT is asleep
|
|
rx_wakelock_timeout=250
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#Rongzheng.tang@Connectivity.Wifi.Network.1031774, 2017/06/18
|
|
#Add for disable active mode offload.
|
|
gActiveModeOffload=0
|
|
|
|
#Wei.Wang@PSW.CN.WiFi.Network.quality.1170942, 2017/12/04,
|
|
#disable qpower,to decrease ping delay and improve download speed
|
|
gEnablePowerSaveOffload=2
|
|
#else /* VENDOR_EDIT */
|
|
#gEnablePowerSaveOffload=1
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Qiulei@PSW.CN.WiFi.Power.1067360 2016/08/08
|
|
#Add for : wifi hongbao ,Enable Host driver and above layers control the PS mechanism
|
|
isAndroidPsEn=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Qiulei@PSW.CN.WiFi.Hardware.1132176, 2017/03/07
|
|
#Add for 2.4G&5G MIMO config,2.4G SAP SISO
|
|
gVdevTypeNss_5g=21930
|
|
gVdevTypeNss_2g=21930
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Qiulei@PSW.CN.WiFi.Hardware.1065440, 2017/05/16
|
|
#Add for show the max linkspeed
|
|
gReportMaxLinkSpeed=1
|
|
gChannelBondingMode24GHz=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Qiulei@PSW.CN.WiFi.Power.802254, 2016/07/20
|
|
#Add for reduce ap sleep current
|
|
gApLinkMonitorPeriod = 25
|
|
#endif
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Min.Yi@PSW.CN.WiFi.Hardware.Power.1323750, 2018/03/21
|
|
#Add for high current when download on 11B
|
|
g11bNumTxChains=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Guotian.Wu@PSW.CN.WiFi.Hardware.OpCustomized.1123073, 2019/07/02
|
|
#disable for CTS test fail
|
|
gEnableRTTSupport=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#Yuan.Huang@PSW.CN.WiFi.Network.internet.1140781, 2017/11/03,
|
|
#Add for data stall detection
|
|
gEnableDataStallDetection=0
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifndef VENDOR_EDIT
|
|
#Tao.Hui@PSW.CN.WiFi.Basic.Custom.1067549, 2018/01/02,
|
|
#Modify for country code JP soft ap cant got 5G list for bug:1194908
|
|
gindoor_channel_support=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#Yuanliu.Tang@PSW.CN.WiFi.Basic.Crash.1135753, 2017/05/27
|
|
#Add for open walkround feature to avoid MTK AP crash,QC case2952499
|
|
gForce1x1Exception=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifdef VENDOR_EDIT
|
|
#Tao.Hui@PSW.CN.WiFi.Basic.Custom.1884719 2019/03/08
|
|
#add for bdf fw rus
|
|
gEnableForceTargetAssert=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
#ifndef VENDOR_EDIT
|
|
#Guotian.Wu@PSW.CN.WiFi.Basic.SoftAP.1181662, 2019/05/31,
|
|
#fix EU JP band1 band4 issue
|
|
etsi_srd_chan_in_master_mode=1
|
|
#endif /* VENDOR_EDIT */
|
|
|
|
# etsi13_srd_chan_in_master_mode - Enable/disable ETSI SRD channels in
|
|
# master mode PCL and ACS functionality
|
|
# @Min: 0
|
|
# @Max: 1
|
|
# @Default: 0
|
|
etsi13_srd_chan_in_master_mode=1
|
|
|
|
ignore_fw_reg_offload_ind=1
|
|
|
|
END
|
|
|
|
# Note: Configuration parser would not read anything past the END marker
|