We use camera2api but this prop was making the ims based stuff to use camera1api which caused ded cam (black cam - receiver not able to see dialer)
This fixes it and now vilte calls work fully
Thanks to srindak unkil for halping me see this derp
The msadp partition contents can now be loaded via request_firmware.
Without this change the msadp image was not picked up during modem
loading
[jmpfbmx]: It fixes:
ueventd : firmware: loading 'msadp' for '/devices/soc/4080000.qcom,mss/firmware/msadp'
ueventd : firmware: could not find firmware for msadp
ueventd : firmware: attempted /etc/firmware/msadp, open failed: No such file or directory
ueventd : firmware: attempted /odm/firmware/msadp, open failed: No such file or directory
ueventd : firmware: attempted /vendor/firmware/msadp, open failed: No such file or directory
ueventd : firmware: attempted /firmware/image/msadp, open failed: No such file or directory
ueventd : firmware: attempted /vendor/firmware_mnt/image/msadp, open failed: No such file or directory
Change-Id: I4d99b56e0e151169b44839c299156878474857cd
- Our device doesn't have sscrpcd, so remove it from init.qcom.rc
fixes:
init: Could not start service 'vendor.sensors' as part of class 'early_hal': Cannot find '/vendor/bin/sscrpcd': No such file or directory
Change-Id: I54e93aaa5e76c168d515d626fb7f4f5e88d30f9f
01-16 20:42:21.500 W/TransactionTracing(788): Could not find layer handle 0x7011020130
01-16 20:42:23.216 W/TransactionTracing(788): Could not find layer id -1
Change-Id: I453c9efe4b6e53e97c1891851c58f20dc71cb64e
Signed-off-by: dotkit <ewprjkt@proton.me>
[ 2.759039] init: Do not have permissions to set 'audio.offload.disable' to 'true' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759060] init: Do not have permissions to set 'audio.sys.noisy.broadcast.delay' to '600' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759074] init: Do not have permissions to set 'audio.sys.offload.pstimeout.secs' to '3' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759137] init: Do not have permissions to set 'persist.audio.fluence.voicecomm' to 'true' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759207] init: Do not have permissions to set 'persist.audio.fluence.voicecall' to 'true' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759222] init: Do not have permissions to set 'persist.audio.fluence.voicerec' to 'false' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759235] init: Do not have permissions to set 'persist.audio.fluence.speaker' to 'true' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759289] init: Do not have permissions to set 'persist.vendor.bt.a2dp_offload_cap' to 'sbc-aptx-aptxhd-aac-ldac' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759309] init: Do not have permissions to set 'ro.qc.sdk.audio.ssr' to 'false' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.759323] init: Do not have permissions to set 'ro.qc.sdk.audio.fluencetype' to 'none' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.760215] init: Do not have permissions to set 'ro.iorapd.enable' to 'false' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.760229] init: Do not have permissions to set 'iorapd.perfetto.enable' to 'false' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.760241] init: Do not have permissions to set 'iorapd.readahead.enable' to 'false' in property file '/vendor/build.prop': SELinux permission check failed
[ 2.760276] init: Do not have permissions to set 'persist.device_config.runtime_native_boot.iorap_readahead_enable' to 'false' in property file '/vendor/build.prop': SELinux permission check failed
We tried doing this on Android 11 and later reverted it due to fd leaks
during prolonged video calls. However, the issue has been fixed on
Android 12, so let's enable it again for performance.
Nanhumly:
SystemUI Lag encountered in Android13 QPR1, probably related to OpenGLRenderer
E/OpenGLRenderer( 1556): Unable to match the desired swap behavior.
W/Parcel ( 1556): Expecting binder but got null!
D/OpenGLRenderer( 2414): endAllActiveAnimators on 0x7adac3e100 (RippleDrawable) with handle 0x7a3803b540
So switch to Vulkan UI renderer for now, even though it has rendering problems in some interfaces.
Change-Id: I1cd2ca6931aad60f9c48d40aa0212b69c68edef8
Signed-off-by: Nishant Kumar <www.rajsonu13@gmail.com>
* Some banking apps read the file /proc/net/unix to
find out whether things like Magisk are installed/running.
To prevent that, chmod it 440.
This file isn't needed by any other process when boot is finished.
I've tested this and banking apps that did not work before
and recognized Magisk being installed now don't recognize
that and work just fine.
This prop has no effect as of T QPR1.
See: cf25e33147
Change-Id: Ic762812dd59429d344ccc55c01bf96b0ffd6dbab
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
Google removed the HAL interfaces in Pixel thermal HAL service after
QPR1 [1]. As a result, the pixel thermal HAL on Xiaomi sdm845 devices
cannot be started correct at boot. Override it in sdm845-common, and
restore the interface definitions.
[1] be6336211e
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
APM would fail to parse the config anyway:
E DevicesFactoryHAL: loadAudioInterface couldn't load audio hw module audio.a2dp (No such file or directory)
W DevicesFactoryHalHidl: The specified device name is not recognized: "a2dp"
E AudioFlinger: loadHwModule() error -22 loading module a2dp
W APM_AudioPolicyManager: could not open HW module a2dp
Change-Id: Iaa1be881cfe8f8474cef0ba46e1b0a62b59e14be
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
So to match what is shipped with stock because prebuilt a-HAL
and extensions are being used.
Change-Id: I74d5bd1de5ea87984ace38076cb5a0bd54736ca6
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
Custom audio policy manager is hard disabled by CAF
for 2 years now. Remove as well the audio feature flags
that were used to configure it.
Change-Id: Idd34d1cbbdb735d6cf0de3b159c2670bf7ddd1e3
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
Some KGSL sysfs nodes need to be access controlled. Set proper
permissions for the same.
Change-Id: Idc7e2447d02742074873901c6539f2c6d9d25862
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
These have been migrated to sysprops in Android 13.
Change-Id: I34c1f6b882a61df6db95523997002512354d875e
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
* These were moved to sysprops in Android 13 [1] and while
frameworks reads the values directly from power_profile.xml
Bluetooth app reads from the properties.
[1] 976d33062b%5E%21/#F0
Change-Id: I5bff67a15c537e8a47a19f30776fca6bf2c9fbe5
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
As of I3c7aed1bdb45db728d319f7d757400e44d232283 the Bluetooth stack
defaults to reasonable defaults that should work for all devices.
Change-Id: I056d63c4c8a2727e384172e964dc0000b6773504
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
* libperfmgr expects mode to be declared in powerhint but dt2w is handled in powerhal
* so let's just force enable it like google did with LOW_POWER
* also use break instead of fallthrough because there's no need to play with hints
Signed-off-by: SamarV-121 <samarvispute121@gmail.com>
