2110e55809
These values can be configured per SIM so they should not be overriden by gps.conf by default. They're left commented out so that it can still be uncommented to allowing overriding SIM configuration for testing purposes Change-Id: Id2f560d88294ab98441005bf54be799af9ed3f8b CRs-fixed: 1075611
180 lines
4.9 KiB
Text
180 lines
4.9 KiB
Text
#Uncommenting these urls would only enable
|
|
#the power up auto injection and force injection(test case).
|
|
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
|
|
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
|
|
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
|
|
|
|
#Version check for XTRA
|
|
#DISABLE = 0
|
|
#AUTO = 1
|
|
#XTRA2 = 2
|
|
#XTRA3 = 3
|
|
XTRA_VERSION_CHECK=0
|
|
|
|
# Error Estimate
|
|
# _SET = 1
|
|
# _CLEAR = 0
|
|
ERR_ESTIMATE=0
|
|
|
|
#NTP server
|
|
NTP_SERVER=time.izatcloud.net
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
# 4 - Debug, 5 - Verbose
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
DEBUG_LEVEL = 3
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
INTERMEDIATE_POS=0
|
|
|
|
# Below bit mask configures how GPS functionalities
|
|
# should be locked when user turns off GPS on Settings
|
|
# Set bit 0x1 if MO GPS functionalities are to be locked
|
|
# Set bit 0x2 if NI GPS functionalities are to be locked
|
|
# default - non is locked for backward compatibility
|
|
#GPS_LOCK = 0
|
|
|
|
# supl version 1.0
|
|
SUPL_VER=0x10000
|
|
|
|
# Emergency SUPL, 1=enable, 0=disable
|
|
#SUPL_ES=0
|
|
|
|
#Choose PDN for Emergency SUPL
|
|
#1 - Use emergency PDN
|
|
#0 - Use regular SUPL PDN for Emergency SUPL
|
|
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
|
|
|
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
|
#If it is uncommented here, this value will overwrite the value from
|
|
#config.xml.
|
|
#MSA=0X2
|
|
#MSB=0X1
|
|
#SUPL_MODE=
|
|
|
|
# GPS Capabilities bit mask
|
|
# SCHEDULING = 0x01
|
|
# MSB = 0x02
|
|
# MSA = 0x04
|
|
# ON_DEMAND_TIME = 0x10
|
|
# GEOFENCE = 0x20
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
|
|
CAPABILITIES=0x37
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
# ACCURACY_THRES=5000
|
|
|
|
################################
|
|
##### AGPS server settings #####
|
|
################################
|
|
|
|
# FOR SUPL SUPPORT, set the following
|
|
# SUPL_HOST=supl.host.com or IP
|
|
# SUPL_PORT=1234
|
|
|
|
# FOR C2K PDE SUPPORT, set the following
|
|
# C2K_HOST=c2k.pde.com or IP
|
|
# C2K_PORT=1234
|
|
|
|
# Bitmask of slots that are available
|
|
# for write/install to, where 1s indicate writable,
|
|
# and the default value is 0 where no slots
|
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
|
# of b1000001010 makes 3 slots available
|
|
# and the remaining 7 slots unwritable.
|
|
#AGPS_CERT_WRITABLE_MASK=0
|
|
|
|
####################################
|
|
# LTE Positioning Profile Settings
|
|
####################################
|
|
# 0: Enable RRLP on LTE(Default)
|
|
# 1: Enable LPP_User_Plane on LTE
|
|
# 2: Enable LPP_Control_Plane
|
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
|
LPP_PROFILE = 2
|
|
|
|
################################
|
|
# EXTRA SETTINGS
|
|
################################
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
NMEA_PROVIDER=0
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
SGLTE_TARGET=0
|
|
|
|
##################################################
|
|
# Select Positioning Protocol on A-GLONASS system
|
|
##################################################
|
|
# 0x1: RRC CPlane
|
|
# 0x2: RRLP UPlane
|
|
# 0x4: LLP Uplane
|
|
A_GLONASS_POS_PROTOCOL_SELECT = 0
|
|
|
|
##################################################
|
|
# Select technology for LPPe Control Plane
|
|
##################################################
|
|
# 0x1: DBH for LPPe CP
|
|
# 0x2: WLAN AP Measurements for LPPe CP
|
|
LPPE_CP_TECHNOLOGY = 0
|
|
|
|
##################################################
|
|
# Select technology for LPPe User Plane
|
|
##################################################
|
|
# 0x1: DBH for LPPe UP
|
|
# 0x2: WLAN AP Measurements for LPPe UP
|
|
LPPE_UP_TECHNOLOGY = 0
|
|
|
|
##################################################
|
|
# AGPS_CONFIG_INJECT
|
|
##################################################
|
|
# enable/disable injection of AGPS configurations:
|
|
# SUPL_VER
|
|
# SUPL_HOST
|
|
# SUPL_PORT
|
|
# C2K_HOST
|
|
# C2K_PORT
|
|
# LPP_PROFILE
|
|
# A_GLONASS_POS_PROTOCOL_SELECT
|
|
# 0: disable
|
|
# 1: enable
|
|
AGPS_CONFIG_INJECT = 1
|
|
# AP Coarse Timestamp Uncertainty
|
|
##################################################
|
|
# default : 10
|
|
# or as per clock uncertainty of product
|
|
AP_TIMESTAMP_UNCERTAINTY = 10
|
|
|
|
#####################################
|
|
# GNSS PPS settings
|
|
#####################################
|
|
#AP DR engine availability status
|
|
# 0 : NO AP DR (default)
|
|
# 1 : AP DR enabled
|
|
#EXTERNAL_DR_ENABLED = 0
|
|
|
|
#####################################
|
|
#DR_SYNC Pulse Availability
|
|
#####################################
|
|
# 0 : DR_SYNC pulse not available (default)
|
|
# 1 : DR_SYNC pulse available
|
|
DR_SYNC_ENABLED = 0
|
|
|
|
#####################################
|
|
#PPS Device name
|
|
#####################################
|
|
PPS_DEVICENAME = /dev/pps0
|
|
|
|
#####################################
|
|
#AP Clock Accuracy
|
|
#####################################
|
|
AP_CLOCK_PPM = 100
|
|
|
|
#####################################
|
|
#MAX ms difference to detect missing pulse
|
|
#####################################
|
|
MISSING_PULSE_TIME_DELTA = 900
|
|
|
|
#####################################
|
|
#Propagation time uncertainty
|
|
#####################################
|
|
PROPAGATION_TIME_UNCERTAINTY = 1
|