1ca544cfb5
GpsLocationProvider gets SUPL_MODE, and passes is to GPS HAL along with other configs upon sim hot swap. GPS HAL needs to parse it out and factor in that information in for ULP so that ULP can make correct decision w.r.t. position mode when gnss positioning is needed. Change-Id: I1a14dd9d9e47b5d7ea072ae08ee99bbb7c69dbe0 CRs-Fixed: 749794
117 lines
3.1 KiB
Text
117 lines
3.1 KiB
Text
#Uncommenting these urls would only enable
|
|
#the power up auto injection and force injection(test case).
|
|
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
|
|
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
|
|
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
|
|
|
|
#Version check for XTRA
|
|
#DISABLE = 0
|
|
#AUTO = 1
|
|
#XTRA2 = 2
|
|
#XTRA3 = 3
|
|
XTRA_VERSION_CHECK=0
|
|
|
|
# Error Estimate
|
|
# _SET = 1
|
|
# _CLEAR = 0
|
|
ERR_ESTIMATE=0
|
|
|
|
#Test
|
|
NTP_SERVER=time.gpsonextra.net
|
|
#Asia
|
|
# NTP_SERVER=asia.pool.ntp.org
|
|
#Europe
|
|
# NTP_SERVER=europe.pool.ntp.org
|
|
#North America
|
|
# NTP_SERVER=north-america.pool.ntp.org
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
# 4 - Debug, 5 - Verbose
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
DEBUG_LEVEL = 3
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
INTERMEDIATE_POS=0
|
|
|
|
# Below bit mask configures how GPS functionalities
|
|
# should be locked when user turns off GPS on Settings
|
|
# Set bit 0x1 if MO GPS functionalities are to be locked
|
|
# Set bit 0x2 if NI GPS functionalities are to be locked
|
|
# default - non is locked for backward compatibility
|
|
#GPS_LOCK = 0
|
|
|
|
# supl version 1.0
|
|
SUPL_VER=0x10000
|
|
|
|
# Emergency SUPL, 1=enable, 0=disable
|
|
SUPL_ES=1
|
|
|
|
#Choose PDN for Emergency SUPL
|
|
#1 - Use emergency PDN
|
|
#0 - Use regular SUPL PDN for Emergency SUPL
|
|
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
|
|
|
|
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
|
#If it is uncommented here, this value will over write the value from
|
|
#config.xml.
|
|
#MSA=0X2
|
|
#MSB=0X1
|
|
#SUPL_MODE=
|
|
|
|
# GPS Capabilities bit mask
|
|
# SCHEDULING = 0x01
|
|
# MSB = 0x02
|
|
# MSA = 0x04
|
|
# ON_DEMAND_TIME = 0x10
|
|
# GEOFENCE = 0x20
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
|
|
CAPABILITIES=0x37
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
# ACCURACY_THRES=5000
|
|
|
|
################################
|
|
##### AGPS server settings #####
|
|
################################
|
|
|
|
# FOR SUPL SUPPORT, set the following
|
|
# SUPL_HOST=supl.host.com or IP
|
|
# SUPL_PORT=1234
|
|
|
|
# FOR C2K PDE SUPPORT, set the following
|
|
# C2K_HOST=c2k.pde.com or IP
|
|
# C2K_PORT=1234
|
|
|
|
# Bitmask of slots that are available
|
|
# for write/install to, where 1s indicate writable,
|
|
# and the default value is 0 where no slots
|
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
|
# of b1000001010 makes 3 slots available
|
|
# and the remaining 7 slots unwritable.
|
|
#AGPS_CERT_WRITABLE_MASK=0
|
|
|
|
####################################
|
|
# LTE Positioning Profile Settings
|
|
####################################
|
|
# 0: Enable RRLP on LTE(Default)
|
|
# 1: Enable LPP_User_Plane on LTE
|
|
# 2: Enable LPP_Control_Plane
|
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
|
LPP_PROFILE = 0
|
|
|
|
################################
|
|
# EXTRA SETTINGS
|
|
################################
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
NMEA_PROVIDER=0
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
SGLTE_TARGET=0
|
|
|
|
##################################################
|
|
# Select Positioning Protocol on A-GLONASS system
|
|
##################################################
|
|
# 0x1: RRC CPlane
|
|
# 0x2: RRLP UPlane
|
|
# 0x4: LLP Uplane
|
|
A_GLONASS_POS_PROTOCOL_SELECT = 0
|