2bef34e8b2
(1) Configure tunc constrained module on modem via gps.conf
(2) Configure position assisted time estimator and inject
DRE position with additional info to modem
(3) Support get total energy consumption API by GNSS engine
since device first bootup
Change-Id: I1e73057df090c1d356c55a498f06eed45839ca8f
CRs-fixed: 2276355
283 lines
8.3 KiB
Text
283 lines
8.3 KiB
Text
#Uncommenting these urls would only enable
|
||
#the power up auto injection and force injection(test case).
|
||
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
|
||
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
|
||
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
|
||
|
||
#Version check for XTRA
|
||
#DISABLE = 0
|
||
#AUTO = 1
|
||
#XTRA2 = 2
|
||
#XTRA3 = 3
|
||
XTRA_VERSION_CHECK=0
|
||
|
||
# Error Estimate
|
||
# _SET = 1
|
||
# _CLEAR = 0
|
||
ERR_ESTIMATE=0
|
||
|
||
#NTP server
|
||
NTP_SERVER=time.izatcloud.net
|
||
|
||
#XTRA CA path
|
||
XTRA_CA_PATH=/system/etc/security/cacerts
|
||
|
||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||
# 4 - Debug, 5 - Verbose
|
||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||
DEBUG_LEVEL = 3
|
||
|
||
# Intermediate position report, 1=enable, 0=disable
|
||
INTERMEDIATE_POS=0
|
||
|
||
# Below bit mask configures how GPS functionalities
|
||
# should be locked when user turns off GPS on Settings
|
||
# Set bit 0x1 if MO GPS functionalities are to be locked
|
||
# Set bit 0x2 if NI GPS functionalities are to be locked
|
||
# default – both MO and NI locked for maximal privacy
|
||
#GPS_LOCK = 3
|
||
|
||
# supl version 1.0
|
||
SUPL_VER=0x10000
|
||
|
||
# Emergency SUPL, 1=enable, 0=disable
|
||
#SUPL_ES=0
|
||
|
||
#Choose PDN for Emergency SUPL
|
||
#1 - Use emergency PDN
|
||
#0 - Use regular SUPL PDN for Emergency SUPL
|
||
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
||
|
||
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
||
#If it is uncommented here, this value will overwrite the value from
|
||
#config.xml.
|
||
#MSA=0X2
|
||
#MSB=0X1
|
||
#SUPL_MODE=
|
||
|
||
# GPS Capabilities bit mask
|
||
# SCHEDULING = 0x01
|
||
# MSB = 0x02
|
||
# MSA = 0x04
|
||
# ON_DEMAND_TIME = 0x10
|
||
# GEOFENCE = 0x20
|
||
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
|
||
CAPABILITIES=0x37
|
||
|
||
# Accuracy threshold for intermediate positions
|
||
# less accurate positions are ignored, 0 for passing all positions
|
||
# ACCURACY_THRES=5000
|
||
|
||
################################
|
||
##### AGPS server settings #####
|
||
################################
|
||
|
||
# FOR SUPL SUPPORT, set the following
|
||
# SUPL_HOST=supl.host.com or IP
|
||
# SUPL_PORT=1234
|
||
|
||
# FOR MO SUPL SUPPORT, set the following
|
||
# MO_SUPL_HOST=supl.host.com or IP
|
||
# MO_SUPL_PORT=1234
|
||
|
||
# FOR C2K PDE SUPPORT, set the following
|
||
# C2K_HOST=c2k.pde.com or IP
|
||
# C2K_PORT=1234
|
||
|
||
# Bitmask of slots that are available
|
||
# for write/install to, where 1s indicate writable,
|
||
# and the default value is 0 where no slots
|
||
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
||
# of b1000001010 makes 3 slots available
|
||
# and the remaining 7 slots unwritable.
|
||
#AGPS_CERT_WRITABLE_MASK=0
|
||
|
||
####################################
|
||
# LTE Positioning Profile Settings
|
||
####################################
|
||
# 0: Enable RRLP on LTE(Default)
|
||
# 1: Enable LPP_User_Plane on LTE
|
||
# 2: Enable LPP_Control_Plane
|
||
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
||
LPP_PROFILE = 2
|
||
|
||
################################
|
||
# EXTRA SETTINGS
|
||
################################
|
||
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
||
NMEA_PROVIDER=0
|
||
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
||
SGLTE_TARGET=0
|
||
|
||
##################################################
|
||
# Select Positioning Protocol on A-GLONASS system
|
||
##################################################
|
||
# 0x1: RRC CPlane
|
||
# 0x2: RRLP UPlane
|
||
# 0x4: LLP Uplane
|
||
A_GLONASS_POS_PROTOCOL_SELECT = 0
|
||
|
||
##################################################
|
||
# Select technology for LPPe Control Plane
|
||
##################################################
|
||
# 0x1: DBH for LPPe CP
|
||
# 0x2: WLAN AP Measurements for LPPe CP
|
||
# 0x4: SRN AP measurement for CP
|
||
# 0x8: Sensor Barometer Measurement LPPe CP
|
||
LPPE_CP_TECHNOLOGY = 0
|
||
|
||
##################################################
|
||
# Select technology for LPPe User Plane
|
||
##################################################
|
||
# 0x1: DBH for LPPe UP
|
||
# 0x2: WLAN AP Measurements for LPPe UP
|
||
# 0x4: SRN AP measurement for UP
|
||
# 0x8: Sensor Barometer Measurement LPPe UP
|
||
LPPE_UP_TECHNOLOGY = 0
|
||
|
||
##################################################
|
||
# AGPS_CONFIG_INJECT
|
||
##################################################
|
||
# enable/disable injection of AGPS configurations:
|
||
# SUPL_VER
|
||
# SUPL_HOST
|
||
# SUPL_PORT
|
||
# MO_SUPL_HOST
|
||
# MO_SUPL_PORT
|
||
# C2K_HOST
|
||
# C2K_PORT
|
||
# LPP_PROFILE
|
||
# A_GLONASS_POS_PROTOCOL_SELECT
|
||
# 0: disable
|
||
# 1: enable
|
||
AGPS_CONFIG_INJECT = 1
|
||
|
||
##################################################
|
||
# GNSS settings for automotive use cases
|
||
# Configurations in following section are
|
||
# specific to automotive use cases, others
|
||
# please do not change, keep the default values
|
||
##################################################
|
||
|
||
# AP Coarse Timestamp Uncertainty
|
||
##################################################
|
||
# default : 10
|
||
# AP time stamp uncertainty, until GNSS receiver
|
||
# is able to acquire better timing information
|
||
AP_TIMESTAMP_UNCERTAINTY = 10
|
||
|
||
##################################################
|
||
# QDR engine availability status
|
||
##################################################
|
||
# 0 : NO QDR (default)
|
||
# 1 : QDR enabled
|
||
# This settings enables QDR Configuration for
|
||
# automotive use case, if enabled then
|
||
# DR_AP_Service needs to be enabled in izat.conf
|
||
#EXTERNAL_DR_ENABLED = 0
|
||
|
||
#####################################
|
||
# DR_SYNC Pulse Availability
|
||
#####################################
|
||
# 0 : DR_SYNC pulse not available (default)
|
||
# 1 : DR_SYNC pulse available
|
||
# This configuration enables the driver to make use
|
||
# of PPS events generated by DR_SYNC pulse
|
||
# Standard Linux PPS driver needs to be enabled
|
||
DR_SYNC_ENABLED = 0
|
||
|
||
#####################################
|
||
# PPS Device name
|
||
#####################################
|
||
PPS_DEVICENAME = /dev/pps0
|
||
|
||
#####################################
|
||
# Ignore PPS at Startup and after long outage
|
||
#####################################
|
||
IGNORE_PPS_PULSE_COUNT = 1
|
||
|
||
#####################################
|
||
# Long GNSS RF outage in seconds
|
||
#####################################
|
||
GNSS_OUTAGE_DURATION = 10
|
||
|
||
#####################################
|
||
# AP Clock Accuracy
|
||
#####################################
|
||
# Quality of APPS processor clock (in PPM).
|
||
# Value specified is used for calculation of
|
||
# APPS time stamp uncertainty
|
||
AP_CLOCK_PPM = 100
|
||
|
||
#####################################
|
||
# MAX ms difference to detect missing pulse
|
||
#####################################
|
||
# Specifies time threshold in ms to validate any missing PPS pulses
|
||
MISSING_PULSE_TIME_DELTA = 900
|
||
|
||
#####################################
|
||
# Propagation time uncertainty
|
||
#####################################
|
||
# This settings enables time uncertainty propagation
|
||
# logic incase of missing PPS pulse
|
||
PROPAGATION_TIME_UNCERTAINTY = 1
|
||
|
||
#######################################
|
||
# APN / IP Type Configuration
|
||
# APN and IP Type to use for setting
|
||
# up WWAN call.
|
||
# Use below values for IP Type:
|
||
# v4 = 4
|
||
# v6 = 6
|
||
# v4v6 = 10
|
||
#######################################
|
||
# INTERNET_APN = abc.xyz
|
||
# INTERNET_IP_TYPE = 4
|
||
# SUPL_APN = abc.xyz
|
||
# SUPL_IP_TYPE = 4
|
||
|
||
#####################################
|
||
# Modem type
|
||
#####################################
|
||
# This setting configures modem type
|
||
# (external=0 or internal=1)
|
||
# comment out the next line to vote
|
||
# for the first modem in the list
|
||
MODEM_TYPE = 1
|
||
|
||
##################################################
|
||
# CONSTRAINED TIME UNCERTAINTY MODE
|
||
##################################################
|
||
# 0 : disabled (default)
|
||
# 1 : enabled
|
||
# This setting enables GPS engine to keep its time
|
||
# uncertainty below the specified constraint
|
||
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
|
||
|
||
# If constrained time uncertainty mode is enabled,
|
||
# this setting specifies the time uncertainty
|
||
# threshold that gps engine need to maintain.
|
||
# In unit of milli-seconds.
|
||
# Default is 0.0 meaning that modem default value
|
||
# of time uncertainty threshold will be used.
|
||
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
|
||
|
||
# If constrained time uncertainty mode is enabled,
|
||
# this setting specifies the power budget that
|
||
# gps engine is allowed to spend to maintain the time
|
||
# uncertainty.
|
||
# Default is 0 meaning that GPS engine is not constained
|
||
# by power budget and can spend as much power as needed.
|
||
# In unit of 0.1 milli watt second.
|
||
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
|
||
|
||
##################################################
|
||
# POSITION ASSISTED CLOCK ESTIMATOR
|
||
##################################################
|
||
# 0 : disabled (default)
|
||
# 1 : enabled
|
||
# This setting enables GPS engine to estimate clock
|
||
# bias and drift when the signal from at least 1
|
||
# SV is available and the UE’s position is known by
|
||
# other position engines.
|
||
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
|