* from android-13.0.0_r3
* Remove audio hints while at it
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
The ndk_platform backend will soon be deprecated because the ndk backend
can serve the same purpose. This is to eliminate the confusion about
having two variants (ndk and ndk_platform) for the same ndk backend.
Bug: 161456198
Test: m
Merged-In: I14a1c57bd06f1f2aa52491f779c7030d4de03547
Change-Id: I14a1c57bd06f1f2aa52491f779c7030d4de03547
Signed-off-by: pix106 <sbordenave@gmail.com>
* Let interaction runs on the most efficient freq for both big and little cluster
Signed-off-by: Clarence K <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
This reverts commit 1229fc5a8473c7ea99e90c4ff0a6f6d3a05a8b14.
* Nuked the schedtune.prefer_high_cap in kernel so it is not useful anymore
* Partially reverts only as some are still useful
Signed-off-by: pix106 <sbordenave@gmail.com>
This reverts commit 1229fc5a8473c7ea99e90c4ff0a6f6d3a05a8b14.
* Nuked the schedtune.prefer_high_cap in kernel so it is not useful anymore
* Partially reverts only as some are still useful
Signed-off-by: pix106 <sbordenave@gmail.com>
* when tested with [1], even after exiting the app, spm was
still active in powerhal thereby keeping max freqs limited
and blocking boosts
* enable/disable it properly and end all other hints before
enabling, to fix this issue
[1] https://android.googlesource.com/platform/cts/+/refs/heads/master/hostsidetests/sustainedperf
Change-Id: I672195fc6f7aba91928e2ab6147a6a7cac51f459
Signed-off-by: chiru2000 <chiranth@m.ms.evolution-x.org>
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* end all running boosts when battery saver is turned on,
and block all boosts until its turned off
Change-Id: I888fe8f3d6779c22e26c24781c492d5576cb5610
Signed-off-by: chiru2000 <chiranth@m.ms.evolution-x.org>
[clarencelol]
* This one integrated into powerhal, much better
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Google removed stune support and misc in A12
* It keep spams failed to write error
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
[clarencelol: It improves scrolling janks in my testing]
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Energy aware feature control is previously done through debugfs,
which will be deprecated, so move the control to sysctl.
Bug: 141333728
Test: function works as expected
Change-Id: I431b3113aa6bcde48b4b7cf9b2097666b948ad80
[clarencelol: These stuffs improve performance significantly]
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
With the kernel patch to separate placement hinting part of
boost signal on placement into a prefer_high_cap hint knob,
TA will lose the boost placement hint.
This CL adds placement hinting back to TA when INTERACTION
is on.
Bug: 144451857
Test: Boot & run jank test.
Change-Id: I3dcb39804d5bbaff344fbdaf64548335a1fdf1ea
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
set the boost value to 1 for CAMERA_STREAMING
Test: pixel test suite
Bug: 138323419
Change-Id: I56d1019d0cb0d206af6629566b09dd4743246289
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Add a boosting control for the camera-daemon
stune cgroup.
Bug: 136608042
Test: Check reset of boost on boot
Change-Id: If0e42d16058989c385c9592a7080662566450b1e
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Remove unnecessary nodes
* Re-adjust scaling frequency
* Disable AUDIO Related hints
* Set both "Flipendo" freq to 1401600
Signed-off-by: pix106 <sbordenave@gmail.com>
* Set it according to kernel value shown here 3f4fbeaa44
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Clover has a different dt2w node
Change-Id: Ic4f2a132b8a102eb01edab86469eccd7dfcd6c84
Co-authored-by: pix106 <sbordenave@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Because perfmgr is a vendor process, it cannot adjust system priority
directly.
Bug: 162791243
Test: build and using emul temp/running burn8 to verify it
Signed-off-by: pix106 <sbordenave@gmail.com>
* 5s is just too much long plus battery drainer
Signed-off-by: DennySPB <dennyspb@gmail.com>
Change-Id: I7e037c45cd2296a8bbd67d6bd63c212c0ef2a805
Signed-off-by: Henrique Pereira <hlcpereira@pixelexperience.org>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Re-adjust scaling frequency
* Set both "Flipendo" freq to 1401600
Signed-off-by: OdSazib <odsazib@gmail.com>
Change-Id: I4e89982ca17fbceada830a55958d1db7806787f7
* Needs Kernel side support
* This activates kernelspace battery saver via powerhal whenever
battery saver is enabled in userspace, thereby lowering power
consumption at kernel-level by disabling boosts and such
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Change-Id: I2623503db27d7518de519bcaa3f5af6ab83879d0
Because perfmgr is a vendor process, it cannot adjust system priority
directly.
Bug: 162791243
Test: build and using emul temp/running burn8 to verify it
Change-Id: I55e49cb7d0b2d4c0e42dff8398b5d42c6546cafa
(cherry picked from commit 1d87413881c5ef74c234d4a7cf4a8707ff0dccfe)
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
Bug: 162791243
Bug: 72471476
Test: build and using emul temp/running burn8 to verify it
Change-Id: I5ca475be8b73b940e4858634595a7918ae92f6ef
(cherry picked from commit 35e110fe669a7d2996ce503d7e31204554f972e3)
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
hardware/google/pixel/power-libperfmgr from android-11.0.0_r25
SQUASHED:
Revert all HIDL interface and nuke previous changes
Import Pixel libperfmgr AIDL Power HAL
Adapt and rebrand for xiaomi_sdm660
Remove Google-specific display LPM control
Remove Google-specific camera and audio hints
Remove VR hints handling
Remove audio hints handling
Remove dumpstate support
Initialize powerHAL when boot is completed
Add support for tap-to-wake feature control
Add sepolicy rules for power-libperfmgr
Enable power-libperfmgr
Signed-off-by: Subhajeet Muhuri <subhajeet.muhuri@aosip.dev>
