Fixed SSR (sub-system reset) issue when
GNSS Measurements where not available
after an SSR.
Change-Id: Ie9ecc851fe53814f4a3e386b503b61bbca9d156d
CRs-fixed: 1036070
merge automotive specific changes from LA.AF.1.2.1 into
location development branch
Change-Id: I90a5e60c46bb5b1aafaf4cd9aaf2dcb79449f288
CRs-Fixed: 1017254
Fixed compilation issues for LA after merging
oe_master with location.lnx.1.0-dev.1.0.
Change-Id: I7940429c369249ab9aa636fe9850c1281cf2dc01
CRs-Fixed: 995520
Replace all separator characters ('/','+','|','%') in the raw string
by their corresponding encodings (%2F","%2B","%7C", "%25")
Change-Id: I3c895adc2ce1cef36032a25e3c6fd63e70350607
CRs-fixed: 881265
The problem was caused by populating the carrier upon phone bootup
when the the property maybe not initialized yet. This module is
updated to remove the populating code of carrier in phone bootup.
Change-Id: I9c3f970aa0f0ca0805fdc2e04aa809329b6a2676
CRs-fixed: 935146
Removed tCreate and tAssociate from MsgTask. LocThread
now can optionally take a tCreate method. Associator is
replaced with *firstMsg* option to MsgTask, which is a
more generic option, that can associate or do other set
up job at the create of a MsgTask.
The current MsgTask doesn't use tCreate, which exposes
a slight time window for Location HAL when its MsgTask
is NOT associated to DVM heap but a message delivery to
DVM could be attempted during this time.
Change-Id: Iafd5b91b693baacb9b7064463f8c44f74026f54c
CRs-Fixed: 902350
Replace all separator characters ('/','+','|','%') in the raw string
by their corresponding encodings (%2F","%2B","%7C", "%25")
Change-Id: I3c895adc2ce1cef36032a25e3c6fd63e70350607
CRs-fixed: 881265
The problem was caused by populating the carrier upon phone bootup
when the the property maybe not initialized yet. This module is
updated to remove the populating code of carrier in phone bootup.
Change-Id: I9c3f970aa0f0ca0805fdc2e04aa809329b6a2676
CRs-fixed: 935146
The used-in-fix mask is only keeping track
of GPS SVs, so add a used-in-fix mask for
GlONASS SVs and BDS SVs as well to avoid
NMEA generation issues
CRs-fixed: 826152
Change-Id: I33862cf8d40db1d667179ef68d18703edc359843
Removed tCreate and tAssociate from MsgTask. LocThread
now can optionally take a tCreate method. Associator is
replaced with *firstMsg* option to MsgTask, which is a
more generic option, that can associate or do other set
up job at the create of a MsgTask.
The current MsgTask doesn't use tCreate, which exposes
a slight time window for Location HAL when its MsgTask
is NOT associated to DVM heap but a message delivery to
DVM could be attempted during this time.
Change-Id: Iafd5b91b693baacb9b7064463f8c44f74026f54c
CRs-Fixed: 902350
The change included the following fixes:
increased buffer size to hold the initial UA string;
use file for saving the initial UA string
Change-Id: I52ef94e57695f1411a34e338e89325de382b09b5
CRs-fixed: 905170
The modem power vote feature needs to move
out of hal as it has non-aosp dependency.
CRs-fixed: 831075
Change-Id: Ic83276e9d3c0d125a01f50719102fcd7c0455385
The modem power vote feature needs to move
out of hal as it has non-aosp dependency
CRs-fixed: 831075
Change-Id: Ic83276e9d3c0d125a01f50719102fcd7c0455385
The used-in-fix mask is only keeping track
of GPS SVs, so add a used-in-fix mask for
GlONASS SVs and BDS SVs as well to avoid
NMEA generation issues
CRs-fixed: 826152
Change-Id: I33862cf8d40db1d667179ef68d18703edc359843
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlTQKUkACgkQoUgPZYCpAfGAUgCgyH0kEyUtVhZ09+T3w4VfnZqK
Id8An3JkWK9QhlXZ9Q2zT8T7LR5/T2ls
=8mx/
-----END PGP SIGNATURE-----
Merge tag 'AU_LINUX_ANDROID_LA.AF.1.1.05.00.02.164.175' into 111
AU_LINUX_ANDROID_LA.AF.1.1.05.00.02.164.175 based on quic/aosp/LA.AF.1.1
* tag 'AU_LINUX_ANDROID_LA.AF.1.1.05.00.02.164.175':
GNSS measurement
Added new events and masks for GDT AP
gps.conf parameters are in sap.conf table
Enable "auto" target for APQ8960 Automotive ADP platform
support reinjecting supl url for sim hot swap
Remove Redundant Log
Report 2D speed rather than 3D speed.
Conflicts:
core/gps_extended_c.h
Change-Id: Ibe1207ac07a2931003f5fa34ae68d8c1e6512eeb
The switch case inside setXtraVersionCheck
does not have breaks after the cases and
the default label is misspelled. This
will always cause the check to be disabled
Change-Id: Ibcc3703c98e561e0bdfbcc5c8802d1b45c9a511a
CRs-Fixed: 790623
The switch case inside setXtraVersionCheck
does not have breaks after the cases and
the default label is misspelled. This
will always cause the check to be disabled
Change-Id: Ibcc3703c98e561e0bdfbcc5c8802d1b45c9a511a
CRs-Fixed: 790623
Change Summary:
* Changes taken from change#812357;
* Structure definitions for GNSS SV Measurement and GNSS SV
Polynomial to report it to ULP and to external DR module;
* New function additions in LocApiBase, LocAdapterBase and
LocEngAdapter to report SV Measurement and SV Polynomial;
* definition and changes to detect "auto" platform in loc_target;
* enable SV Measurement and SV Polynomial report for "auto"
platform;
Change-Id: I5ac5ee5c44e72e657b16515e37637c9a5c64e638
Implementation of GNSS Measurements support.
In GPS HAL, Only GPS Measurements report
will be collected from modem.
CRs-fixed: 771496
Change-Id: Ief4368099df4ff573ad1a764f4156d63685e936d
GPS_LOCK is defined as a bit mask in the higher layer
defined in gps.conf. GPS HAL reads from gps.conf, yet
this can be reconfigured by gps.h defined new API to
a different value. The current value will be used at
cleanup() time, to optionally lock gps modem to the
configured mode.
This changs also sets SUPL URL to NULL if hostname
comes with set_server() API is a NULL string.
Also optimized configuration_update() implementation
so that no all items will go through the reconfigu
scan.
Also added SUPL_MODE as a parameter in gps.conf which
can be uncommented to over-write the value from config.xml.
This can be used for testing purposes
Bug: 16131208
Bug: 17288144
CRs-fixed: 736966
Change-Id: I12a89b12ff82b6efd7b5567d2fcd6a7e79414c71
The first time injection is ignored from
an adapter that doesn't support CPI Extended
Capabilities to prevent time from being
injected twice on startup.
CRs-fixed: 720540
Change-Id: If786cf2c750906093f21272aae928e4d9fc4dea8
A new QMI LOC msg is introduced which injects into
the modem a value that determines whether or not
the version of XTRA is to be checked
Change-Id: I0ef579332d064713ce73d80e66dc8c6fef1c1638
CRs-fixed: 649860
To avoid the race condition between
when the fix criteria is set and checked,
the position mode is copied to the dummy
ULP proxy and it is used to inform ULP
when a true proxy is registered
Change-Id: I72285c7926814ec85dae64e6634f0c79ea5e6c51
CRs-fixed: 604905
To avoid the race condition between
when the fix criteria is set and checked,
the position mode is copied to the dummy
ULP proxy and it is used to inform ULP
when a true proxy is registered
Change-Id: I72285c7926814ec85dae64e6634f0c79ea5e6c51
CRs-fixed: 604905
Changes for enabling Zero Power positioning feature in the
location services subsystem.It involves modifications to
HAL and ULP engine.
CRs-Fixed: 457060
Change-Id: I62187e66d44c5b40e1b2a41cafc0cb3e7c94f6d8
send ULP the position mode if it is valid when ULP handle
is first received. This helps handling a race condition
where ULP handshake happens when a GPS session is about
to happen or already happening.
Change-Id: I029e5c3bbb9d8e89b220ca44e9704b5a1d1451ff
CRs-Fixed: 554340
In order to preserve the ordering of
position reports and status reports from
the GPS engine, status reports are sent
through the ULP too
CRS-Fixed: 538143
Change-Id: I41be2121493c6a0b35a5726fd546eb0fa5e9b20c
Changes to ensure that we dont free UlpProxy object
by mistake when loc_init is invoked twice.
CRs-Fixed: 532599
Change-Id: I0989368b67614181b3d834e61690211497663352
Resolved issue where XTRA data was being requested instead
of time during On-Demand time injection.
CRs-Fixed: 530415
Change-Id: Ibf057073dc4eddc011f5df5c13d60eb552eec8c9
ULP will no longer be loaded and init'ed from loc eng
HAL. GPS HAL will look for ULP once it completes init
and waits for a msg back once it hears from ULP. This
is done with introduction of UlpProxy. Default proxy
is a no op proxy.
Change-Id: If0be0b5744f9de20f12c2f0b9704dea66aa454c0
(cherry picked from commit 2eb4ddcae94283df6c6be450c4c070ffd8ff9cd7)
