init: Command 'start rfs_access' action=boot
(/vendor/etc/init/hw/init.target.rc:88) took 0ms and failed: service
rfs_access not found
Change-Id: I1549a36f0663bfe8de381ccb493b757cd5375cbc
Signed-off-by: pix106 <sbordenave@gmail.com>
* Some users reported bootanimation lags and freezes
after a while. Looking from logs it fails to exit
once boot is completed. Stopping bootanimation
service, as workaround, is preventing this issue.
Signed-off-by: DarkJoker360 <simoespo159@gmail.com>
Signed-off-by: 7Soldier <reg.fm4@gmail.com>
Signed-off-by: Vitorgl2003 <vitorgl.2003@gmail.com>
Signed-off-by: ImPrashantt <prashant33968@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
boot_complete
some sysfs node may not be ready before boot_complete:
e.g. we are delaying bw_hwmon in favor of boot time
Bug: 80321544
Test: Boot and check powerhint handling
Change-Id: I8d2cfa332d9cf9fbafdfa3f48ffff4105c6bcaae
Signed-off-by: ImPrashantt <prashant33968@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* temporary fix for wake-up issue on GDX sensor
* disabled vendor.fps_hal after finishing boot(still usable since it was started already on boot-up, fingerprint option still available on Settings > Security > Figerprint)
* also guarded it for GDX sensor only so it won't stop for devices with FPC sensor
Signed-off-by: wHo-EM-i <ehteshammalik18998@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Sleep modes are then turned on once boot is completed
or during off-mode charger mode.
Signed-off-by: ImPrashantt <prashant33968@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Set it on init instead of after boot
* Add camera-daemon schedtune
* Fix some derp
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
This reverts commit 1229fc5a8473c7ea99e90c4ff0a6f6d3a05a8b14.
* Nuked the schedtune.prefer_high_cap in kernel so it is not useful anymore
* Partially reverts only as some are still useful
Signed-off-by: pix106 <sbordenave@gmail.com>
* Prebuilt libcameraservice sets this prop to 1 if the running camera
app is MIUI/ANX camera, and 0 otherwise
* This is needed to unlock all functions of MIUI/ANX camera in
the camera HAL, such as pro mode controls, beauty modes, portrait
depth slider and much more, and mainly fixes excess noise in
camera shots taken with our ultrawide lens
* We won't keep the prop enabled by default because as long as its
enabled, gcam/mods crash immediately on launch and we don't want
that. So let's retain the stock behaviour instead.
[clarencelol]: * avc: denied { set } for property=sys.camera.miui.apk pid=1008 uid=1047 gid=1005 scontext=u:object_r:system_prop:s0 tclass=property_service permissive=0
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
[clarencelol: It improves scrolling janks in my testing]
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
With the kernel patch to separate placement hinting part of
boost signal on placement into a prefer_high_cap hint knob,
TA will lose the boost placement hint.
This CL adds placement hinting back to TA when INTERACTION
is on.
Bug: 144451857
Test: Boot & run jank test.
Change-Id: I3dcb39804d5bbaff344fbdaf64548335a1fdf1ea
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Since power_off_alarm is vendor module, so rename it to
vendor.power_off_alarm
Change-Id: Ib4bf6574117cd6b0a381d96de2abf4907a54785d
CRs-Fixed: 2858409
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* As per the init.qcom.rc service defination has vendor prefix
* This Fixes:
I init : Command 'start rmt_storage' action=boot (/vendor/etc/init/hw/init.target.rc:161) took 0ms and failed: service rmt_storage not found
Change-Id: I271adb887b9420d631e67eb4e7f436f0cd931f32
Signed-off-by: pix106 <sbordenave@gmail.com>
On fs/post-fs trigger there are chances of vendor partition mounting,
which may block ipa loading. To prevent the same change the
trigger level.
Signed-off-by: pix106 <sbordenave@gmail.com>
* This gives proper permission to /dev/diag node so that diag driver
can load successfully
* Logs spam with error '-13' which basically translates to access denied/invalid permission.
* Fix this by giving system read and write access.
Change-Id: I87fe322e7c0d91a494d29213e6f657ed8a7032a6
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Needs Kernel side support
* This activates kernelspace battery saver via powerhal whenever
battery saver is enabled in userspace, thereby lowering power
consumption at kernel-level by disabling boosts and such
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Change-Id: I2623503db27d7518de519bcaa3f5af6ab83879d0
All this does is to disable msm_core and set the
polling_interval to 0, which makes the driver useless.
We can achieve the same result by disabling the driver.
Change-Id: Ic19c505ed74811a3d1b76703255af3aa5cb37bf9
Signed-off-by: Davide Garberi <dade.garberi@gmail.com>
Signed-off-by: Subhajeet Muhuri <subhajeet.muhuri@gmail.com>
Signed-off-by: OdSazib <odsazib@gmail.com>
* This is manually ported by me from Lavender tree on Corvus-Devices
* Thanks @StyloGey for reviewing the java code and giving me a better solution
* Original repo: https://github.com/Corvus-Devices/device_xiaomi_lavender.git
To get it working, you need these two commits in your kernel:
> c04d6d6e61
> 8e25ac3318
Signed-off-by: OdSazib <odsazib@gmail.com>
Change-Id: I1bb48ced1f23728daa2e5170647ce08a04347110
