Currently only $GPGSA was being generated for GPS satellites.
This change adds $GNGSA for GLONASS satellites as well.
Change-Id: I7ab0e92c7ed4ce73be11909eefe0d570a1a0fc1e
CRs-Fixed: 978745
carrier specific SUPL_MODE is not updated upon sim card insert.
gpc_conf must be updated with the new value for config to be
updated.
Change-Id: I2a5f10fa7d27be9253e9ca6f34c0c886285d1b11
CRs-Fixed: 953942
Replace all separator characters ('/','+','|','%') in the raw string
by their corresponding encodings (%2F","%2B","%7C", "%25")
Change-Id: I3c895adc2ce1cef36032a25e3c6fd63e70350607
CRs-fixed: 881265
The problem was caused by populating the carrier upon phone bootup
when the the property maybe not initialized yet. This module is
updated to remove the populating code of carrier in phone bootup.
Change-Id: I9c3f970aa0f0ca0805fdc2e04aa809329b6a2676
CRs-fixed: 935146
NMEA Strings should introduce the sub milli sec part in the
relevant NMEA Strings for NHZ Sessions
Change-Id: I9bac4caa26e87741e5e82e16a8047af20ac8012b
CRs-Fixed: 951144
Reduce memory footprint by moving data sets into const
data segments. Update function parameters to accept const
parameters when appropriate.
CRs-fixed: 928770
Change-Id: I42955cf18de2b0541cfaed89359cdcf9ae6fea8a
In order to handle ipv6 requests, a new struct
is being used instead of an array to store ipv6
info
CRs-Fixed: 817295
Change-Id: I030d4206c01724f08b311697f0bbefb1f9fd10e6
Removed tCreate and tAssociate from MsgTask. LocThread
now can optionally take a tCreate method. Associator is
replaced with *firstMsg* option to MsgTask, which is a
more generic option, that can associate or do other set
up job at the create of a MsgTask.
The current MsgTask doesn't use tCreate, which exposes
a slight time window for Location HAL when its MsgTask
is NOT associated to DVM heap but a message delivery to
DVM could be attempted during this time.
Change-Id: Iafd5b91b693baacb9b7064463f8c44f74026f54c
CRs-Fixed: 902350
The change included the following fixes:
increased buffer size to hold the initial UA string;
use file for saving the initial UA string
Change-Id: I52ef94e57695f1411a34e338e89325de382b09b5
CRs-fixed: 905170
Post SSR, ensure necessary config injection is done before restarting
an existing tracking session
Change-Id: I1bec8ff1cab3a9762e73a13958fe91c62f40fb92
CRs-fixed: 888187
byte long each, but the loc_set_config_entry() util call
writes an int at a time, causing buffer overflow. #2, in
loc_xtra-init(), a data structure wrap happened without
iniializing the unused data fields.
Change-Id: I96b40a330316927d276840a997082fe759263699
CRs-Fixed: 866937
This change moves those definitions related to FLP form
gps_extented_c.h to gps-noship.
Change-Id: I3da452fa3e885af509199cae9fe1b1f24ff48100
CRs-fixed: 801916
GPGGA/GPRMC/GPGSA can be reported two times per
second in some cases where we lose all satellite
signals. We should report these NMEA sentences only
from position report to prevent this.
CRs-fixed: 884484
Change-Id: I123d9f074ca725703c6e90397160b701033e22f0
The modem power vote feature needs to move
out of hal as it has non-aosp dependency.
CRs-fixed: 831075
Change-Id: Ic83276e9d3c0d125a01f50719102fcd7c0455385
NMEA is supposed to be generated only when GPS tracking
is going on in GPS HAL but it was also observed when
ZPP report, so add a check if isInSession is true to
avoid that.
Change-Id: Ia6152fe78243d45e71adccce956d0a727c3f17a2
The used-in-fix mask is only keeping track
of GPS SVs, so add a used-in-fix mask for
GlONASS SVs and BDS SVs as well to avoid
NMEA generation issues
CRs-fixed: 826152
Change-Id: I33862cf8d40db1d667179ef68d18703edc359843
If overwrite happened, loc config update will
restore gps.conf capabilities based on target type.
Change-Id: I958ce8da0e8062549f12808aca4aebcf4a7fb95d
CRs-Fixed: 850144
libloc_api-rpc code is not built for any targets,
so it's removed. NOTICE file is unnecessary and
can be remvoed.
Change-Id: I7da6f0d5a7d90fd4ad7ef51d9eaee88d2a7a20ac
CRs-fixed: 827856
GPS Status is reported from Loc Api layer, so
reporting it in Loc Eng layer in addition is
redundant. Also, SSR should not send engine on
status when not in a session.
Change-Id: I10bc2d112574de0016110e193d6c2cd071b00b2a
CRs-fixed: 826256
The switch case inside setXtraVersionCheck
does not have breaks after the cases and
the default label is misspelled. This
will always cause the check to be disabled
Change-Id: Ibcc3703c98e561e0bdfbcc5c8802d1b45c9a511a
CRs-Fixed: 790623
Implementation of GNSS Measurements support.
In GPS HAL, Only GPS Measurements report
will be collected from modem.
CRs-fixed: 771496
Change-Id: Ief4368099df4ff573ad1a764f4156d63685e936d
due to merge issue, some of the parameters to come out
from gps.conf are placed in the table that expects from
sap.conf. Moving them into the right place.
Change-Id: Ice988b06d0d87bdbc0225296898d6aaad701743f
CRs-Fixed: 760152
modem might reset during sim hot swap, in which case
the prior supl url shall be remembered so that can be
reinjected. This change enables it.
CRs-fixed: 771493
Change-Id: I86ec898a54bc8706720c29a1ea67ce27153ee981
This change removes redundant log
printing, including SV info and
position report.
Change-Id: Ifcf827f73e6c940e3fcb93402bc7a4b22e9a9d4e
CRs-fixed: 765333
According to Android API standard, it should be only the
horizontal speed. Therefore, the speed should be reported
in 2D rather than 3D.
Change-Id: Ie42aa350637b56394869bac0af0207a5aceeede6
CRs-fixed: 745419
GpsLocationProvider gets SUPL_MODE, and passes is to
GPS HAL along with other configs upon sim hot swap.
GPS HAL needs to parse it out and factor in that
information in for ULP so that ULP can make correct
decision w.r.t. position mode when gnss positioning
is needed.
Change-Id: I1a14dd9d9e47b5d7ea072ae08ee99bbb7c69dbe0
CRs-Fixed: 749794
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlRGYwkACgkQoUgPZYCpAfF2rwCg5quG/L+pzo5R94uD/QSR1Xs6
mpsAoIxxW/ftz0uMbp67UANrb7EQyVNY
=eKHq
-----END PGP SIGNATURE-----
Merge tag 'AU_LINUX_ANDROID_KK.04.04.04.010.214' into HEAD
AU_LINUX_ANDROID_KK.04.04.04.010.214 based on quic/aosp/kk
Change-Id: Ida51fa96a5a39fcb3bb2f2c6ab9be84a3ec44d41
when the device boots with gps disabled in settings and
later enabled post pwoer up, the lock state doesn't get
updated correctly.
Bug: 16131208
CRs-fixed: 736966
Change-Id: Ice8237a3fd67740819de573ffebbab851363163d
there is an implicit requirement on the loc_gps_cfg_s_type field
data type, that is they must be 32 bit fields. Otherwise it would
only work with the assistance of padding. When two adjacent 8 bit
fields are defined, the later filled field would overwrite the
previously written neighbor. This is why GPS_LOCK was tested as
broken in the latest build.
This also fixes a theoretic bug that when there are two of the
same fields defined in the config table to be filled, the
accounting of the filled entries was incorrect earlier. This is
not a realistic bug, as there are no idential entries in the
config table HAL fills.
Bug: 16131208
CRs-fixed: 736966
Change-Id: I2e262fb30272f6f334508df17bb640022d7b1ef5
GPS_LOCK is defined as a bit mask in the higher layer
defined in gps.conf. GPS HAL reads from gps.conf, yet
this can be reconfigured by gps.h defined new API to
a different value. The current value will be used at
cleanup() time, to optionally lock gps modem to the
configured mode.
This changs also sets SUPL URL to NULL if hostname
comes with set_server() API is a NULL string.
Also optimized configuration_update() implementation
so that no all items will go through the reconfigu
scan.
Also added SUPL_MODE as a parameter in gps.conf which
can be uncommented to over-write the value from config.xml.
This can be used for testing purposes
Bug: 16131208
Bug: 17288144
CRs-fixed: 736966
Change-Id: I12a89b12ff82b6efd7b5567d2fcd6a7e79414c71
currently HAL does not allow gps paremeter reconfiguration
before HAL init. This change allows that. The new config
items will be cached only. Upon HAL init, the parameters
that interest modem will be injected.
Bug: 17110478
CRs-fixed: 736966
Change-Id: Ie8d180a0ed6a35776f1ee0342f88dfc010ec2746
Some of the parameters configured in gps.conf may be
carrier dependent. This provides a mechanism so that
GpsLocationProvider can determine current operator
resolve of the carrier specific configurations and
update HAL with those configurations post init.
Bug: 17110478
CRs-fixed: 736966
Change-Id: I80aa4404da7666824335fee074dae2ffcba40548
To prevent reading beyond the length of
the buffer that contains XTRA data, a
check has been introduced assuming an
approximate limit for the size of the
data
Change-Id: I7e05beadec76c3308448b9198fd23c8e8b97394d
CRs-fixed: 420623
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlQizM8ACgkQoUgPZYCpAfH5yQCgmx8aSsNKN3FRVfYiXQK8Zq7i
9FkAn0tDuuuy3sib/8fh/S+VCU/l8UKI
=VC4+
-----END PGP SIGNATURE-----
Merge tag 'AU_LINUX_ANDROID_KK.04.04.04.010.171' into HEAD
AU_LINUX_ANDROID_KK.04.04.04.010.171 based on quic/aosp/kk
Change-Id: Ieeb7a3b116fd4ac9091582b40de5a9c468ca68ea
Added a new gps.conf parameter which can
be used to decide whether or not to use
data services to bring up call using emergency
PDN or use default SUPL PDN
Change-Id: I604a1489e66339eb2c27019dafab640f7a15cd84
CRs-fixed: 685639
