In Android 14, prioritization of partitions is emphasized, diverging
from previous versions where priorities were respected universally.
Overlay precedence now plays a critical role, with the following
partition order dictating overlay precedence:
- system
- vendor
- odm
- oem
- product
- system_ext
When multiple overlays contend for the same resources, the order of
overlays becomes crucial. An overlay takes precedence over others if it
has configurations following its own. This prioritization, while
impactful for GSI compatibility, is essential for maintaining order and
functionality.
* (pix106) Only WifiOverlay packages did not have vendor explicitely defined
Change-Id: I8b7568dcc418dbbd1ccb39e2d0dc66504f19fcdd
On devices with cellular data available, I've been experiencing Wi-Fi
dropouts on 5 GHz networks where it disconnects and falls back to
cellular data around a RSSI of -77 dBm. While the Wi-Fi quality may not
be ideal at this signal level, it is still better to stay on it than
switch to cellular data because switching networks can be very
disruptive to the user.
To make matters worse, the signal tends to oscillate around -77 dBm in
my case, which causes it to oscillate between Wi-Fi and cellular data
every few seconds. This causes far more disruptions than staying on weak
Wi-Fi would.
These signal levels were measured empirically on a Pixel 5, but they
should apply to most devices. 2.4 GHz values were found to be more or
less accurate, but 5 GHz networks continued to work past the AOSP
thresholds. The iPhone 6s was also content with these signal levels and
still displayed 2 of 3 signal levels at -77 dBm.
Change-Id: I377be8374955530a5f6c084620460cac87e6a126
Signed-off-by: pix106 <sbordenave@gmail.com>
* gSoftApMaxPeers is not set in WCNSS_qcom-cfg.ini
* As kernel define it default 32 in drivers/staging/qcacld-3.0/components/mlme/dispatcher/inc/cfg_mlme_sap.h, make system settings same
Signed-off-by: pix106 <sbordenave@gmail.com>
* as c999a1a2b9d975610ffa359ba34cb27d016165cc has unlocked setupwizard rotation, auto rotation default as "on" is not meaningless now
Signed-off-by: pix106 <sbordenave@gmail.com>
* we have support for SAE and SAE upgrade
* tested WPA3, WPA2/WPA3 mode both in AP, Client mode, auto
* also it's declared support in booth 4.4 and 4.19 sdm660 kernel
Signed-off-by: pix106 <sbordenave@gmail.com>
* We don't need to manually set this anymore.
Change-Id: I1239ba541636e53f8ea4373d3815024f2cd60824
Signed-off-by: Immanuel Raj <iamimmanuelraj@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
