Mount of tracefs in /sys/kernel/debug/tracing will fail when DEBUG_FS
is disabled. So, mount tracefs in /sys/kernel/tracing to still use all the
tracing abilities when CONFIG_DEBUG_FS is disabled
Change-Id: Ib37332c3f1108d7c4798717f0f009c891db72850
Signed-off-by: pix106 <sbordenave@gmail.com>
* As https://source.android.com/docs/security/features/encryption/file-based said emmc_optimized is a inlinecrypt flavor and can only be applied on emmc 5.2 device which has not been released yet
* Apparently Xiaomi 660 is launched with emmc 5.1 5 years ago and never met the 5.2 spec
* Now really enables inlinecrypt hardware by adding it in mnt_flags
* Use AOSP recommended inlinecrypt_optimized
* Use lazytime for reducing meaningless io
* Label metadata partition
(pix106) i use logdump partition for metadata, not cust
Signed-off-by: pix106 <sbordenave@gmail.com>
* We don't have the chre binary and MIUI also disabled it.
Change-Id: I57a95643c366f8b1ce1a8af5ff2ebbf9b29e316d
Signed-off-by: YumeMichi <do4suki@gmail.com>
Signed-off-by: Henrique Pereira <hlcpereira@pixelexperience.org>
Signed-off-by: snnbyyds <snnbyyds@gmail.com>
Signed-off-by: Immanuel Raj <iamimmanuelraj@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* this won't cause zram not to work, but will cause dmesg spit a
"denied" warning
* removing swapon in "fs" scope following aosp instruction
* ref -> https://source.android.com/docs/core/perf/boot-times
Signed-off-by: pix106 <sbordenave@gmail.com>
Wlan driver is compiled from kernel. Not only the module is non-existent
but also it's unnecessary and causes insmod failure. So, don't do it.
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
init.qti.can.sh doesn't exist. So, executing the non-existent bash
scripts only results in failure. Don't do it.
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
shmbus doesn't exist for us. Removing a non-existent file/folder only
causes the command to fail and spam the dmesg.
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
"bg" seems to be "background" after examining the path using a root
explorer. "blkio.weight" is non-existent. So, remove it.
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
While implementing the capo nanoapp for audio configuration, we met
some chre socket connected error due to the access group denied.
Add context_hub group for audio hal to connect chre socket.
go/capo-algo
Bug: 141128522
Bug: 149069556
Test: FULL build with audio hal part and local prebuilts nanoapp.
Test: Audio HAL communicates normally with CHRE socket.
Change-Id: Iea84411682f4c3e08f8b37a5b21818b0e9b04983
Signed-off-by: pix106 <sbordenave@gmail.com>
* LA.QSSI.13.0.r1-09700-qssi.0
* Honeywell/hon660/hon660:12/94.00.03/0037:user/release-keys
* sync Hidl manifest version with Hon660 and S62 Pro
* build hostapd_cli(though Android GUI interface does not need this to manage the ap client, we may want to control them from the shell, maybe)
* remove rmt_storage, tftp_server from rootdir script, they are self contained now
* the vendor.qti.tftp.rc is patched with 782ab1966f
* fix cnd denial
Co-authored-by: 1582130940 <1582130940@qq.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Google has mentioned that 512 KB performs worse under heavy memory pressure.
Therefore, hardcode 128 KB read-ahead for all which is optimal.
Also, remove the unused block paths.
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
init: Command 'start rfs_access' action=boot
(/vendor/etc/init/hw/init.target.rc:88) took 0ms and failed: service
rfs_access not found
Change-Id: I1549a36f0663bfe8de381ccb493b757cd5375cbc
Signed-off-by: pix106 <sbordenave@gmail.com>
writepid command usage to join a cgroup has been deprecated in favor
of a more flexible approach using task_profiles. This way cgroup path
is not hardcoded and cgroup changes can be easily made. Replace
writepid with task_profiles command to migrate between cgroups.
Bug: 191283136
Test: build and boot
Co-authored-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
For easy transition from SchedTune to UtilClamp, direct access to these
cgroups should be abstracted by using task profiles. Replace writepid
commands with new task_profiles command.
Bug: 155419956
Test: change .rc file and confirm task profile is applied
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ide373c283359cf4b73af4cb0813d8c0306942595
Merged-In: Ide373c283359cf4b73af4cb0813d8c0306942595
Signed-off-by: pix106 <sbordenave@gmail.com>
If we set 2048KB ra value in the beginning of the
boot process, services initialized at this time would
keep 2048KB ra value even though we adjust the ra value
to 128KB after boot completion.
This may cause memory pressure.
Bug: 174700194
Signed-off-by: Randall Huang <huangrandall@google.com>
Change-Id: I97ee0ee9511eaada011f2634afd68d68cdca4570
Signed-off-by: pix106 <sbordenave@gmail.com>
* replace with 660 stock irq conf(miui/s62pro are same)
* remove not needed service define in init.qcom.rc
This reverts commit fe0aeb3704.
Signed-off-by: pix106 <sbordenave@gmail.com>
* before Bus 001 Device 010: ID 18d1:4ee2 Google Inc. Nexus/Pixel Device (MTP + debug)
* after Bus 001 Device 015: ID 2717:ff48 Xiaomi Inc. Mi/Redmi series (MTP + ADB)
Signed-off-by: pix106 <sbordenave@gmail.com>
- non-existing
- init: Could not start service 'nqnfcinfo' as part of class
'late_start': Cannot find '/system/vendor/bin/nqnfcinfo': No such file
or directory
Change-Id: I2ded3327ba721f629b7f5ea31d6861fed0e7c6c4
Signed-off-by: pix106 <sbordenave@gmail.com>
* We do not use logkit
Change-Id: I7719bbcebbd053addd16684926eff30d46b945d8
Signed-off-by: ImSpiDy <spidy2713@gmail.com>
Signed-off-by: wHo-EM-i <ehteshammalik18998@gmail.com>
Signed-off-by: ImPrashantt <prashant33968@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Change-Id: I42170d51a517170b58d532addd9c38496e43457c
jasmine_sprout: Remove QTI perfd
Bug: 69270928
Test: Build and boot device and test camera
Change-Id: I87b283206f462fb5c8ec9cdd303ae2934fe9bfc4
jasmine_sprout: Declare BOARD_VENDOR
* Needed for xiaomi-perfmgr power AIDL guards
Change-Id: Idbb48e0f9b01090a456ad5d3f2d51f4dfab55672
jasmine_sprout: Create dummy libqti-perfd-client
* proprietary perfd blobs can finally be nuked without breaking goodix
* we could even map the functions to use libperfmgr powerhints in the future
[SebaUbuntu]: Cleanup Android.bp and add copyright header
Change-Id: I124652f3041761966a3e3bd97c757fecc39cc5fb
jasmine_sprout: libqti-perfd-client: Remove namespace declaration
It's pointless when using extern "C".
Change-Id: Ibdf9f06a70aa3a75687b33781c78cf2172bb334d
jasmine_sprout: libqti-perfd-client: return a dummy value
Return a positive integer for perf lock acquire and release so
that Goodix/FPC fingerprint sensor blobs will not complain.
Goodix:
E [goodixHAL][gf_hal_milan_f_series]: goodix_perf_lock_acquire: Failed to acquire perf lock, err: 0
E [goodixHAL][gf_hal_milan_f_series]: goodix_perf_lock_release: Perf lock release error 0
FPC:
E fpc_tac : fpc_perf_lock_acquire: Incorrect params, Failed to acquire perf lock, err
E fpc_tac : fpc_perf_lock_release: Perf lock release error 0
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
Change-Id: I861672e9a738c2204755d802670f4b28b662f286
jasmine_sprout: libqti-perfd-client: Move to C
* Why bothering with C++ mangling when we can just build it as a standard C library?
Change-Id: I45ea977edf7ea7fab6fece76f3049654a8d24c5d
jasmine_sprout: Add powerhint.json jasmine
Change-Id: If270fc906fd833bb6b0d3b00621c0b079346e47d
jasmine_sprout: rootdir: Initial libperfmgr init config
* From coral, heavily stripped down
Change-Id: Ib6846e4f4f23baf56910d2330e26846b99830218
jasmine_sprout: sepolicy: Initial libperfmgr sepolicy
Change-Id: I3d0a259bc89b4ecd0bf1632199172710d98230e0
jasmine_sprout: Don't explicitly build older minor version HIDL libs
Change-Id: Ib0caa49054a79b1f01ffc751826286a29c642e06
jasmine_sprout: Remove QTI perf reminants
jasmine_sprout: Add back ro.vendor.extension_library definition
* We aren't using QCOM's perfd but our blobs still check for this.
* To avoid unnecessary errors, let's just add it back.
Change-Id: Icc44b330f21a658cfa8ded691a6628d8f62c3649
Signed-off-by: pix106 <sbordenave@gmail.com>
