Introduced support for handling modem request
to start an emergency call using QMI WDS profiles
or fallback to an ATL request if the call does
not succeed.
Change-Id: I29b617687db0d3f26610bc74f8dc95940574f52d
The function was returning an error code
which was causing GPSLocationProvider to
fail initialization
CRs-fixed: 501318
Change-Id: Icec707c3b9edc60bd07914b130077f9a96c5e794
Position report NMEAs will be generated only
if the position report is a final fix and not
an intermediate fix. Blank NMEAs will be sent
otherwise.
CRs-fixed: 467575
Change-Id: I60e63faf3e4503f5a6ce93211d4017aa7695b78b
GPS-enable gets too heavy at powerup, when loc_init is
synchronous, where loc goes to get the hardware handle
if AP init happens faster than the GPS hardware. The
loc init calling thread is from Android framework, and
it locks a mutex that in turn could lock up system server
main thread upon race conditions.
The second half of loc init, i.e. the reinit, is now moved
to loc worker thread. This should help release some of the
powerup timing pressure on the framework threads.
Add a message just for asynchrous Loc Init so as to execute
init specifically.
Change-Id: I369e461ca4ca61cea3a9729c84d24af4ffa8e51d
CRs-fixed: 472843
Changes to ensure FLP positioning call flow works
even if GPS is disabled on the Android settings
menu.
CRs-Fixed: 476628
Change-Id: I54b9f9861a14f7c42f45c48e57e9558f14a4de92
Updated LOC API source and header files
since the new version had updated masks
that were required for loc eng
Change-Id: Ia0d57770a737ef6d05e881ac0512eb174e7c9fd1
To allow ulp to select MSA for single shot
location requests, change the recurrence type
for MSA requests to SINGLE.
CRs-fixed: 479303
Change-Id: I97043233e0590b25bc63f3709b2bbb3dfd22cbd0
This is so that data disable is not
sent to the modem by default if data
is enabled
Change-Id: I383443fc0321380c22382ba7d7f85dacf948853a
CRs-fixed: 460376
No support for SUPl,starting MSB it wouldn.t request a PD.
Disabled the MSA and MSB for this PL.
This fix is needed because this PL doesnot have a modem.
Change-Id: I8fa1145db07f681c0f6e733da253f06f01f7edd6
CRs-Fixed: 471589
Since the switch for ulp in gps.conf did not truly turn QCA
implementation for Fused Location Provider on/off this change
removes this redundant parameter from gps.conf
Change-Id: I677c42a00e6b0d156c2e4c3b65da13a55eb97279
CRs-Fixed: 461273
The number of bytes to be written for
the checksum exceeded the buffer length.
This change corrects makes the correction.
Change-Id: If90c6f5b2006a013a096a767334deac1555553f1
CRs-fixed: 468553
gps.conf now split into
izat.conf: proprietary items
sap.conf : sensor assisted positioning items
gps.conf : items used in open source
(gps.conf moved to open source)
CRs-fixed: 461129
Change-Id: I819230ee3bb13aad0b91f7d33bfb9e57b6d1abe1
Earlier this identification was done in loc.cpp
This change moves that to a separate utility.
Also included is a change to not return
a handle to the GPS interface if the target
is found to be MPQ8064.
This change is a re-cherry-pick from
change id - I98d5619d2e6e63711a9b56f0af2b3ddd27372871
Change-Id: I058d206c37245b44f1cf74d6065e7ce46f50baf7
CRs-Fixed: 418009
Changes for providing the plumbing from UlpService down
to the native UlpEngine.
Change-Id: I67e48fad47675d9fa9a3026763daa0f248369f60
CRs-Fixed: 443444
Earlier this identification was done in loc.cpp
This change moves that to a separate utility.
Also included is a change to not return
a handle to the GPS interface if the target
is found to be MPQ8064.
CRs-Fixed: 418009
Change-Id: I98d5619d2e6e63711a9b56f0af2b3ddd27372871
As a security measure, callbacks
are checked to make sure they are
not NULL pointers.
Change-Id: I391e1cc373e8098449303709d8d1b67d305fb633
CRs-Fixed: 404438
Disable coarse position injection from GPS HAL when XTWiFi
Network Location Provider is in use. This is needed to avoid self
learning loop inside modem.
Change-Id: I0526317221d3490c41d0d8d901fbfa4d93e9a0b0
CRs-Fixed: 409409
Previously, modem's request for NTP time was not supported.
This change enables that request to be serviced through the HAL
and current NTP time is injected into the modem
CRs-Fixed: 406357
Change-Id: I471f98cf57a276902d7991da48cf7244fe798318
this is to support bringup efforts. This change will decouple
the dependencies between GPS HAL and proprietary QMI headers,
so that we can build HAL without any proprietary repos.
Change-Id: I7b836d09f4ac6b1a1bdb38f8d6a2bfb90bb5bf01
Changes to assign the correct permissions for 'gps" group for
Rx path from HAL to BIT daemon
Change-Id: I6c5dc4ff0a1379a95888f4d98e88f0174a7a2a79
CRs-Fixed: 400339, 387672
The id for apq8064 v2 is 153 vs apq8064 v1
id of 109, so the id can be either in order
to conclude that the device is apq8064 so
that GSS can be launched.
Change-Id: I8126854f18ba30a1fe46992993185266e9d1db18
CRs-fixed: 405494
AgpsStatus added with a couple string fields for wifi
which are not NULL ended when they are not used. This
get passed to AFW JNI, and allow UTF8 string with the
open ended buffer with junks in it. It might cause
exception depending on the content of the garbadge.
CRs-Fixed: 405473
Change-Id: If762748a4c63fe1be59491b5d08dbadd479176b3
Since modem does not consistently send
SESSON_END/ENGINE_OFF event, always report
SESSION_END on stop gps and SESSION_BEGIN on
start gps so that the icon is turned on/off
correctly.
CRs-fixed: 401664
Change-Id: Ib3954529056a653d7057aedb489be1ccee9eaf1d
