* Seems to work just fine with 4.19 version of jaswayne
* Nuked mi_thermald
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
This file will silence the warnings on qmi
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Change-Id: I7d7ec0da00a33a0da8f189b0181d40919b9918e5
Signed-off-by: pix106 <sbordenave@gmail.com>
* referenced by legacy drivers/staging/qca-wifi-host-cmn/hif/src/hif_napi.h
* /sys/kernel/irq_helper/irq_blacklist_on not exist on 4.19
* correct 4.19 irq name in comment
Signed-off-by: pix106 <sbordenave@gmail.com>
* replace with 660 stock irq conf(miui/s62pro are same)
* remove not needed service define in init.qcom.rc
This reverts commit fe0aeb3704.
Signed-off-by: pix106 <sbordenave@gmail.com>
* Set it according to kernel value shown here 3f4fbeaa44
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Change-Id: I42170d51a517170b58d532addd9c38496e43457c
jasmine_sprout: Remove QTI perfd
Bug: 69270928
Test: Build and boot device and test camera
Change-Id: I87b283206f462fb5c8ec9cdd303ae2934fe9bfc4
jasmine_sprout: Declare BOARD_VENDOR
* Needed for xiaomi-perfmgr power AIDL guards
Change-Id: Idbb48e0f9b01090a456ad5d3f2d51f4dfab55672
jasmine_sprout: Create dummy libqti-perfd-client
* proprietary perfd blobs can finally be nuked without breaking goodix
* we could even map the functions to use libperfmgr powerhints in the future
[SebaUbuntu]: Cleanup Android.bp and add copyright header
Change-Id: I124652f3041761966a3e3bd97c757fecc39cc5fb
jasmine_sprout: libqti-perfd-client: Remove namespace declaration
It's pointless when using extern "C".
Change-Id: Ibdf9f06a70aa3a75687b33781c78cf2172bb334d
jasmine_sprout: libqti-perfd-client: return a dummy value
Return a positive integer for perf lock acquire and release so
that Goodix/FPC fingerprint sensor blobs will not complain.
Goodix:
E [goodixHAL][gf_hal_milan_f_series]: goodix_perf_lock_acquire: Failed to acquire perf lock, err: 0
E [goodixHAL][gf_hal_milan_f_series]: goodix_perf_lock_release: Perf lock release error 0
FPC:
E fpc_tac : fpc_perf_lock_acquire: Incorrect params, Failed to acquire perf lock, err
E fpc_tac : fpc_perf_lock_release: Perf lock release error 0
Signed-off-by: Chenyang Zhong <zhongcy95@gmail.com>
Change-Id: I861672e9a738c2204755d802670f4b28b662f286
jasmine_sprout: libqti-perfd-client: Move to C
* Why bothering with C++ mangling when we can just build it as a standard C library?
Change-Id: I45ea977edf7ea7fab6fece76f3049654a8d24c5d
jasmine_sprout: Add powerhint.json jasmine
Change-Id: If270fc906fd833bb6b0d3b00621c0b079346e47d
jasmine_sprout: rootdir: Initial libperfmgr init config
* From coral, heavily stripped down
Change-Id: Ib6846e4f4f23baf56910d2330e26846b99830218
jasmine_sprout: sepolicy: Initial libperfmgr sepolicy
Change-Id: I3d0a259bc89b4ecd0bf1632199172710d98230e0
jasmine_sprout: Don't explicitly build older minor version HIDL libs
Change-Id: Ib0caa49054a79b1f01ffc751826286a29c642e06
jasmine_sprout: Remove QTI perf reminants
jasmine_sprout: Add back ro.vendor.extension_library definition
* We aren't using QCOM's perfd but our blobs still check for this.
* To avoid unnecessary errors, let's just add it back.
Change-Id: Icc44b330f21a658cfa8ded691a6628d8f62c3649
Signed-off-by: pix106 <sbordenave@gmail.com>
For earpiece to be properly enumerated as a output device,
set valid and supported out_ channel mask.
Change-Id: Ic83b009956ff43567b3acbb186d0069b16e91e83
Signed-off-by: pix106 <sbordenave@gmail.com>
This is no longer needed as of Android 13.
Change-Id: I38435c47c8781678f82014decbbae40dcab0a07b
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
When the parameter is set to this value and voice packets are
detected in uplink or downlink data traffic, the QPower inactivity
timeout is reset to the default QPower-disabled value (200 ms).
This means that QPower power saving is not be triggered until
after 200ms of inactivity (EAPOL and ARP packets are excluded from
the check).
Change-Id: I86553a1f1dee73add4eb1b6c3933a39745a16de8
Signed-off-by: pix106 <sbordenave@gmail.com>
* Since there are no need for us to do any specific changes here
Signed-off-by: Ratoriku <a1063021545@gmail.com>
Signed-off-by: raiyanbinmohsin <raiyanbinmohsinshishir@gmail.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Build libgui_vendor from source
* Using CAF's way of media_{codecs, profiles}
* Uprev media.c2
* Cleanup dead and unused target
Signed-off-by: pix106 <sbordenave@gmail.com>
Ini config values TxPower2g and TxPower5g are not
getting used anymore.
Remove TxPower2g and TxPower5g from WCNSS_qcom_cfg.ini
for all the targets.
Change-Id: Id85bec3e4ae3bb8012e13844bb0afa682a593fee
CRs-Fixed: 2607679
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* cgroups and task_profiles exists in system/etc/task_profiles, but it does not has API26 ones so we add it
* Schedtune sometimes fail maybe because of this but still unsure
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Currently, time_daemon is not able to send message to modem
time-services over QMI due to permission denials. The patch
takes care of the issue by adding net_raw permissions for
time_daemon service ID.
Change-Id: Ibbd55349a7abc536486dea7b29e293f9f533dd85
Signed-off-by: Akash Srivastava <akashniki@gmail.com>
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
Android 12 allows the brightness ramp rate to be changed separately
for fast/slow and increase/decrease in float. Once loaded,
DisplayDeviceConfig has higher priority than the integer config
values in frameworks. The format definition is in [1].
The value can be found in boot logs by grepping DisplayDeviceInfo.
On android 11, boot log reports the 19xxxxx value of the second
variant. On android 12, boot log reports the 46xxxxx value of the
first variant.
The xml file can be put in either product or vendor.
[1] frameworks/base/services/core/xsd/display-device-config/display-device-config.xsd
[clarencelol: Adjust accordingly based on brightness minimum and nits in overlay]
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* Retune some fps values based on CAF
* Removed some unused decoder
* From LA.UM.8.2.r1-07400-sdm660.0
* Build some media extensions
* Added some media codecs from google
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
* clean some duplicates,deprecated and not uses anymore
* build vendor.qti.hardware.btconfigstore@1.0 from source
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
-> Introducing new attribute to know if second stage detection
supported on given target
-> By default it is supported on all targets
-> Define only on those targets with value false where no support
Signed-off-by: pix106 <sbordenave@gmail.com>
Remove surround sound recording support from audio policy config xml
as its resulting in CTS failure due to mismatch in channel index support
for record usecase.
Change-Id: Idf50b3f2e71c4209720e79c0248ce74bc1a0edf2
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: pix106 <sbordenave@gmail.com>
