sdm660-common: gps: add changes from clover for wifi only gps

Change-Id: I03caa72e72a59cbbd33c1ceae64921de0c1d4bdc

gps/etc/flp.conf

@@ -36,6 +36,14 @@ OUTDOOR_TRIP_BATCH_SIZE=600
 # defaults to 20 seconds by the modem.
 # BATCH_SESSION_TIMEOUT=20000
 
+###################################
+# FLP CAPABILITIES BIT MASK
+###################################
+# GEOFENCE = 0x01
+# BATCHING = 0x02
+# default = GEOFENCE | BATCHING
+CAPABILITIES=0x03
+
 ###################################
 # FLP BATCHING ACCURACY
 ###################################
@@ -49,6 +57,32 @@ OUTDOOR_TRIP_BATCH_SIZE=600
 # High accuracy = 2
 ACCURACY=1
 
+###################################
+# FLP GEOFENCE RESPONSIVENESS
+###################################
+# If set to one of the defined values below,
+# it will override the responsiveness for
+# FLP geofence, which implements the fused
+# location API. If not set to a value defined
+# below, which is default, it will not
+# override the responsivness.
+# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0
+
+####################################
+# By default APPS must support LB only if modem support
+# LB 1.5 and above. This parameter adds an exception
+# for targets where modem only supports LB 1.0.
+# This might be useful for primarily outdoor devices.
+# 0: MUST NOT ALLOW LB IF MODEM ONLY SUPPORTS
+# LB 1.0
+# 1: ALLOW LB IF MODEM ONLY SUPPORTS LB 1.0
+####################################
+ALLOW_LB_1_0 = 0
+
 ####################################
 # By default if network fixes are not sensor assisted
 # these fixes must be dropped. This parameter adds an exception

gps/etc/gps.conf

@@ -1,3 +1,9 @@
+#Uncommenting these urls would only enable
+#the power up auto injection and force injection(test case).
+#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
+#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
+#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
+
 #Version check for XTRA
 #DISABLE = 0
 #AUTO    = 1
@@ -24,11 +30,18 @@ DEBUG_LEVEL = 3
 # Intermediate position report, 1=enable, 0=disable
 INTERMEDIATE_POS=0
 
+# Below bit mask configures how GPS functionalities
+# should be locked when user turns off GPS on Settings
+# Set bit 0x1 if MO GPS functionalities are to be locked
+# Set bit 0x2 if NI GPS functionalities are to be locked
+# default - non is locked for backward compatibility
+#GPS_LOCK = 0
+
 # supl version 1.0
 SUPL_VER=0x10000
 
 # Emergency SUPL, 1=enable, 0=disable
-#SUPL_ES=1
+#SUPL_ES=0
 
 #Choose PDN for Emergency SUPL
 #1 - Use emergency PDN
@@ -47,8 +60,9 @@ SUPL_VER=0x10000
 # MSB = 0x02
 # MSA = 0x04
 # ON_DEMAND_TIME = 0x10
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
+# GEOFENCE = 0x20
-CAPABILITIES=0x17
+# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
+CAPABILITIES=0x37
 
 # Accuracy threshold for intermediate positions
 # less accurate positions are ignored, 0 for passing all positions
@@ -142,7 +156,7 @@ A_GLONASS_POS_PROTOCOL_SELECT = 0
 # 0x2: WLAN AP Measurements for LPPe CP
 # 0x4: SRN AP measurement for CP
 # 0x8: Sensor Barometer Measurement LPPe CP
-#LPPE_CP_TECHNOLOGY = 0
+LPPE_CP_TECHNOLOGY = 0
 
 ##################################################
 # Select technology for LPPe User Plane
@@ -151,7 +165,7 @@ A_GLONASS_POS_PROTOCOL_SELECT = 0
 # 0x2: WLAN AP Measurements for LPPe UP
 # 0x4: SRN AP measurement for UP
 # 0x8: Sensor Barometer Measurement LPPe UP
-#LPPE_UP_TECHNOLOGY = 0
+LPPE_UP_TECHNOLOGY = 0
 
 ##################################################
 # AGPS_CONFIG_INJECT