diff --git a/configs/wifi/WCNSS_qcom_cfg.ini b/configs/wifi/WCNSS_qcom_cfg.ini
index af085db2..962d60e6 100644
--- a/configs/wifi/WCNSS_qcom_cfg.ini
+++ b/configs/wifi/WCNSS_qcom_cfg.ini
@@ -77,7 +77,7 @@ g11hSupportEnabled=1
 gEnableDFSMasterCap=1
 
 # ESE Support and fast transition
-EseEnabled=1
+EseEnabled=0
 
 ImplicitQosIsEnabled=0
 
@@ -96,7 +96,7 @@ FastRoamEnabled=1
 # terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
 # use this value as to how better the RSSI of the new/roamable AP should
 # be for roaming
-RoamRssiDiff=3
+RoamRssiDiff=5
 
 # To enable, set gRoamIntraBand=1 (Roaming within band)
 # To disable, set gRoamIntraBand=0 (Roaming across band)
@@ -223,9 +223,6 @@ gEnableTxBFin20MHz=1
 #Enable/Disable SU Tx beamformer support.
 gEnableTxSUBeamformer=1
 
-#Enable thermal mitigation
-gThermalMitigationEnable=0
-
 gEnableFastRoamInConcurrency=1
 
 #Maxium Channel time in msec
@@ -242,9 +239,7 @@ gEnablefwprint=0
 
 # Firmware log mode
 # Valid values are 0,1,2
-# 0 - Disable
-# 1 - WMI
-# 2 - DIAG
+# 0=Disable, 1=WMI, 2=DIAG
 gEnablefwlog=1
 
 # Maximum Receive AMPDU size (VHT only. Valid values:
@@ -381,7 +376,7 @@ gTDLSExternalControl=1
 gEnableTDLSOffChannel=1
 
 # Enable or Disable Random MAC (Spoofing)
-# 1=Enable, 0=Disable (default)
+# 1=Enable (default), 0=Disable
 gEnableMacAddrSpoof=1
 
 ################ Datapath feature set Begin ################
@@ -427,7 +422,7 @@ gCEClassifyEnable=1
 
 # Enable Rx handling options
 # Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
-rx_mode=4
+rx_mode=5
 
 # Enable(Tx) fastpath for data traffic.
 # 1 - enable(default)  0 - disable
@@ -441,9 +436,9 @@ gEnableIpTcpUdpChecksumOffload=1
 # 1 - enable  0 - disable
 TSOEnable=1
 
-# Enable Large Recieve Offload
+# Enable Generic Receive Offload
 # 1 - enable(default)  0 - disable
-LROEnable=1
+GROEnable=1
 
 # Enable HT MPDU Density
 # 4 for 2 micro sec
@@ -466,6 +461,15 @@ ce_service_max_rx_ind_flush=1
 
 # Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
 maxMSDUsPerRxInd=8
+
+# Enable NUD tracking feature
+# 1 - enable 0 - disable(default)
+gEnableNUDTracking=1
+
+# Enable PEER UNMAP CONF SUPPORT
+# 1 - enable 0 - disable(default)
+gEnablePeerUnmapConfSupport=1
+
 ################ Datapath feature set End ################
 
 ################ NAN feature set start ###################
@@ -473,7 +477,9 @@ maxMSDUsPerRxInd=8
 # Enable NAN discovery (NAN 1.0)
 # 1 - enable  0 - disable(default)
 gEnableNanSupport=1
+# Enable NAN Datapath
 genable_nan_datapath=1
+
 ################ NAN feature set end #####################
 
 adaptive_dwell_mode_enabled=1
@@ -566,7 +572,7 @@ mawc_nlo_enabled=0
 # bit-3 : drop XID - Exchange station Identification packet
 # bit-4 : drop STP - Spanning Tree Protocol
 # bit-5 : drop DTP/LLC/CDP
-g_enable_packet_filter_bitmap=0
+g_enable_packet_filter_bitmap=3
 
 # Enable/Disable Data stall detection
 # 0: disable
@@ -629,12 +635,14 @@ etsi_srd_chan_in_master_mode=1
 
 gActiveUcBpfMode=1
 gActiveMcBcBpfMode=1
-g_enable_packet_filter_bitmap=3
 
-# Enable pkt log
-# 1 - enable, 0 - disable
-gEnablePacketLog=1
-g_enable_packet_filter_bitmap=3
+drop_bcn_on_chan_mismatch=0
+
+# Enable/Disable rtt sta mac randomization
+enable_rtt_mac_randomization=1
+
+#Enable/Disable SNR monitoring
+gEnableSNRMonitoring=1
 
 END