sdm660: wifi: Update Config from platina-user-10-QKQ1.190910.002-9.12.4-release-keys

wifi/WCNSS_qcom_cfg.ini

@@ -59,7 +59,7 @@ gFixedRate=0
 # gFragmentationThreshold=2346
 
 # RTS threshold
-RTSThreshold=1048576
+RTSThreshold=2346
 
 # CTS2SELF_ENABLED_4_SWRETRIES
 gEnableRTSProfiles=34
@@ -99,12 +99,11 @@ FastRoamEnabled=1
 # terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
 # use this value as to how better the RSSI of the new/roamable AP should
 # be for roaming
-RoamRssiDiff=3
+RoamRssiDiff=5
 
 # To enable, set gRoamIntraBand=1 (Roaming within band)
 # To disable, set gRoamIntraBand=0 (Roaming across band)
 gRoamIntraBand=0
-
 # Sets RSSI preference for 5GHz over 2.4GHz AP
 gSelect5GHzMargin=5
 
@@ -159,6 +158,9 @@ gChannelBondingMode24GHz=1
 gGoKeepAlivePeriod = 20
 gApKeepAlivePeriod = 20
 
+#Enable Keep alive with non-zero period value
+gStaKeepAlivePeriod = 30
+
 #If set will start with active scan after driver load, otherwise will start with
 #passive scan to find out the domain
 gEnableBypass11d=1
@@ -316,7 +318,11 @@ gMaxConcurrentActiveSessions=3
 
 # Disable/Enable GreenAP
 # 0 to disable, 1 to enable, default: 1
-gEnableGreenAp=0
+gEnableGreenAp=1
+
+# Disable/Enbale Enhanced Green AP
+# 0 to disable, 1 to enable, default: 0
+gEnableEGAP=1
 
 # Radar PRI multiplier
 gDFSradarMappingPriMultiplier=4
@@ -424,7 +430,7 @@ gCEClassifyEnable=1
 
 # Enable Rx handling options
 # Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
-rx_mode=5
+rx_mode=4
 
 # Enable(Tx) fastpath for data traffic.
 # 1 - enable(default)  0 - disable
@@ -442,11 +448,6 @@ TSOEnable=1
 # 1 - enable(default)  0 - disable
 LROEnable=1
 
-# Enable Generic Receive Offload
-# LRO and GRO are exclusive to each other
-# LRO support is deprecated on latest 4.9(SDM845) kernel
-GROEnable=1
-
 # Enable HT MPDU Density
 # 4 for 2 micro sec
 ght_mpdu_density=4
@@ -468,7 +469,6 @@ ce_service_max_rx_ind_flush=1
 
 # Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
 maxMSDUsPerRxInd=8
-
 ################ Datapath feature set End ################
 
 ################ NAN feature set start ###################
@@ -487,13 +487,12 @@ adapt_dwell_lpf_weight=80
 
 adapt_dwell_wifi_act_threshold=10
 
-# Enable/Disable DTIM Synth
+# Enable pkt log
-# 1- Enable DTIM Synth
+# 1 - enable, 0 - disable
-# 0- Disable DTIM Synth
+gEnablePacketLog=1
-gEnableLPRx=0
 
 # Force 1x1 for 2.4g SAP, P2P-GC/GO, 2x2 for STA
-gVdevTypeNss_2g=21846
+# gVdevTypeNss_2g=21846
 
 # 0: Disable BPF packet filter
 # 1: Enable BPF packet filter
@@ -501,14 +500,14 @@ gBpfFilterEnable=1
 
 # 0: Disable force 1x1 on MTK solution AP
 # 1: Enable force 1x1 on MTK solution AP
-gForce1x1Exception=1
+# gForce1x1Exception=1
 
 # set modulated DTIM interval
 gEnableModulatedDTIM=3
 gMaxLIModulatedDTIM=3
 
 # groam_dense_rssi_thresh_offset - Sets dense roam RSSI threshold diff
-groam_dense_rssi_thresh_offset=0
+groam_dense_rssi_thresh_offset=5
 
 # Dense traffic threshold in kBps
 gtraffic_threshold=50
@@ -524,7 +523,7 @@ gRoamBmissFinalBcnt=20
 # 1: enabled for Rx traffic
 # 2: enabled for Tx traffic
 # 3: enabled for Tx and Rx traffic
-gper_roam_enabled=3
+gper_roam_enabled=0
 
 # arp_ac_category - ARP access category
 # Firmware by default categorizes ARP packets with VOICE TID.
@@ -533,7 +532,6 @@ gper_roam_enabled=3
 # WME_AC_VI = 2 (Video)
 # WME_AC_VO = 3 (Voice)
 arp_ac_category=0
-
 # Enable/Disable DTIM Synth
 # 1- Enable DTIM Synth
 # 0- Disable DTIM Synth
@@ -549,6 +547,20 @@ enable_esp_for_roam=1
 ##################### Scoring Param ###############
 esp_qbss_score_idx7_to_4=0000000A
 
+#############################################
+# MAWC related configurations
+#############################################
+
+# MAWCEnabled - Enable/Disable Motion Aided Wireless Connectivity Global
+MAWCEnabled=0
+
+# mawc_roam_enabled - Enable/Disable MAWC during roaming
+mawc_roam_enabled=0
+
+# Enable/Disable the Motion Aided Wireless Connectivity
+# based NLO using this parameter
+mawc_nlo_enabled=0
+
 # Enable Packet filters before going into suspend
 # will clear those when resume
 # bit-0 : drop MAC multicast and IPv4 multicast
@@ -567,6 +579,7 @@ gEnableDataStallDetection=0
 #Enable host side recovery
 gEnableSelfRecovery=1
 
+#enable/disable FT open feature
 enable_ftopen=0
 
 # This ini is used to allow STA+SAP SCC on LTE coex channel
@@ -615,6 +628,9 @@ gTxBFCsnValue=4
 # @Default: 0
 etsi13_srd_chan_in_master_mode=1
 
+gActiveUcBpfMode=1
+gActiveMcBcBpfMode=1
+
 END
 
 # Note: Configuration parser would not read anything past the END marker