sdm660-common: Import gps configs from LA.UM.9.6.2.r1-03600-89xx.0
This commit is contained in:
OdSazib
parent
15d9c83201
commit
1977da527c
6 changed files with 754 additions and 0 deletions
188
gps/etc/apdr.conf
Normal file
188
gps/etc/apdr.conf
Normal file
|
|
@ -0,0 +1,188 @@
|
|||
# AP DR SENSOR Configuration file
|
||||
#
|
||||
# SENSOR_SERVICE options are one of below
|
||||
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
|
||||
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
|
||||
#
|
||||
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
|
||||
#
|
||||
# SENSOR_RATE = 1~100 (Hz)
|
||||
#
|
||||
# SENSOR_SAMPLES = 1~N
|
||||
#
|
||||
# SENSOR_STATISTIC_ENABLED
|
||||
# bit 0: Diag Print Enabled
|
||||
# bit 1: Adb Print Enabled
|
||||
# SENSOR_STATISTIC_PRINT_COUNT
|
||||
# Skip Number of Print
|
||||
#
|
||||
# QDR_DYNAMIC_LOADING = 1~3
|
||||
# Configure QDR library to be loaded
|
||||
# 1: QDR3
|
||||
# 2: QDR2-GYRO
|
||||
# 3: QDR2-DWT
|
||||
#
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR3 Configuration #
|
||||
# #
|
||||
# For QDR3, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
SENSOR_SERVICE = accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_speed
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = gyro
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_gear
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = accel_temp
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 1
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
QDR_DYNAMIC_LOADING = 1
|
||||
##Specify CAN sensor type: Valid Options: 14(ODO), 2(ODO_DWT), 3(ODO_DWS)
|
||||
QDR_CAN_TYPE = 14
|
||||
##Reporting offset before PPS boundary
|
||||
QDR_REPORTING_OFFSET = 20
|
||||
#
|
||||
##QDR_ENABLE_QG shall be set as 1
|
||||
QDR_ENABLE_QG = 1
|
||||
#GEAR Optimisation
|
||||
QG_GEAR_ON_CHANGE=1
|
||||
#
|
||||
|
||||
##Vehicle Sensor Configuration (CAN data availability)
|
||||
##QDR_VEH_SENSOR_CONFIG:
|
||||
## 0: VEHICLE_SENSOR_PRESENT - Vehicle Sensor is available (DEFAULT)
|
||||
## 1: VEHICLE_SENSOR_OPTIONAL - Vehicle Sensor may or may not be present.
|
||||
#QDR_VEH_SENSOR_CONFIG = 0
|
||||
|
||||
##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
|
||||
##To be used for differential wheel tick OR speed service.
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as
|
||||
##ODO_DWS(3) or ODO_DWT(2).
|
||||
##Value "0": Use Front two wheels
|
||||
##Value "1": Use Rear two wheels
|
||||
##Value "2": Use All four wheels
|
||||
#QG_DRIVE_WHEEL_FW_RW_AW = 2
|
||||
##Max Wheel tick value above which wheel tick rolls over
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
|
||||
##Configure Wheel constant for DWT based below equation
|
||||
##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_WHEEL_CONSTANT = 0.044
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-DWT Configuration #
|
||||
# #
|
||||
# For QDR2-DWT, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_dws
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#GNSS_POS_STATISTIC_ENABLED = 3
|
||||
#GNSS_POS_STATISTIC_PRNTCNT = 10
|
||||
#GNSS_MSR_STATISTIC_ENABLED = 3
|
||||
#GNSS_MSR_STATISTIC_PRNTCNT = 10
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 3
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-GYRO Configuration #
|
||||
# #
|
||||
# For QDR2-GYRO, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gyro
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 2
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
#
|
||||
277
gps/etc/izat.conf
Normal file
277
gps/etc/izat.conf
Normal file
|
|
@ -0,0 +1,277 @@
|
|||
#########################################
|
||||
# Log verbosity control for izat modules
|
||||
#########################################
|
||||
# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
|
||||
IZAT_DEBUG_LEVEL = 2
|
||||
|
||||
##################################################
|
||||
# Select WIFI Wait Timeout value in seconds for SUPL
|
||||
##################################################
|
||||
WIFI_WAIT_TIMEOUT_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Time interval of injecting SRN scan data to modem
|
||||
# time in seconds.
|
||||
# Note: recommended value is between 1-5 sec
|
||||
##################################################
|
||||
LPPE_SRN_DATA_SCAN_INJECT_TIME=2
|
||||
|
||||
################################
|
||||
# NLP Settings
|
||||
################################
|
||||
# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
|
||||
# For Automotive products, please use NLP_MODE = 4 only.
|
||||
# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for first position
|
||||
# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for positions after first
|
||||
# NLP_THRESHOLD: Sets how many failures needed before
|
||||
# switching preferred NLP in Combo mode
|
||||
# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
|
||||
# must be, in multiples, between two NLP location reports to
|
||||
# be considered much worse accuracy. Used in switching logic
|
||||
# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
|
||||
# whether or not to still send network location requests to
|
||||
# QNP when the EULA is not consented to by the user. QNP can
|
||||
# still return ZPP locations or injected locations even
|
||||
# without EULA consent, but the uncertainty can be high.
|
||||
# QNP preferred mode prefers QNP when there is EULA consent,
|
||||
# otherwise OSNLP is used.
|
||||
NLP_MODE = 1
|
||||
NLP_MODE_EMERGENCY = 2
|
||||
NLP_TOLERANCE_TIME_FIRST = 5000
|
||||
NLP_TOLERANCE_TIME_AFTER = 20000
|
||||
NLP_THRESHOLD = 3
|
||||
NLP_ACCURACY_MULTIPLE = 2
|
||||
NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
|
||||
|
||||
#########################################
|
||||
# NLP PACKAGE SETTINGS
|
||||
#########################################
|
||||
# OSNLP_PACKAGE: name of default NLP package
|
||||
OSNLP_PACKAGE = com.google.android.gms
|
||||
# REGION_OSNLP_PACKAGE:
|
||||
# This value will be used as alternative
|
||||
# for particular region where default NLP is not functional.
|
||||
#REGION_OSNLP_PACKAGE =
|
||||
|
||||
###################################
|
||||
# GEOFENCE SERVICES
|
||||
###################################
|
||||
# If set to one of the defined values below, it will override
|
||||
# the responsiveness for geofence services, which implements
|
||||
# the Proximity Alert API. If not set to a value defined below,
|
||||
# which is default, it will not override the responsivness.
|
||||
# The geofence HAL API is unaffected by this value.
|
||||
# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
|
||||
# 1: LOW responsiveness
|
||||
# 2: MEDIUM responsiveness
|
||||
# 3: HIGH responsiveness
|
||||
GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
|
||||
|
||||
#####################################
|
||||
#GTP Opt-In app
|
||||
#####################################
|
||||
|
||||
#GTP privacy policy version url
|
||||
#https support is required
|
||||
GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
|
||||
|
||||
#GTP privacy policy version download retry interval
|
||||
#unit is second. default is 86400
|
||||
GTP_PRIVACY_RETRY_INTERVAL = 86400
|
||||
|
||||
#####################################
|
||||
# IZAT PREMIUM FEATURE SETTINGS
|
||||
#####################################
|
||||
#Possible states of a feature:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
#PREMIUM
|
||||
|
||||
#GTP_MODE valid modes:
|
||||
# DISABLED
|
||||
# LEGACY_WWAN
|
||||
# SDK (WWAN not available for Modems before LocTech 10.0)
|
||||
# SDK_WIFI (WWAN provided by legacy Modem)
|
||||
GTP_MODE=DISABLED
|
||||
|
||||
#GTP_WAA valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
GTP_WAA=DISABLED
|
||||
|
||||
#SAP valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
# PREMIUM
|
||||
# PREMIUM_ENV_AIDING
|
||||
# MODEM_DEFAULT
|
||||
SAP=MODEM_DEFAULT
|
||||
|
||||
#FREE_WIFI_SCAN_INJECT valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
FREE_WIFI_SCAN_INJECT=BASIC
|
||||
|
||||
#SUPL_WIFI valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
SUPL_WIFI=BASIC
|
||||
|
||||
#WIFI_SUPPLICANT_INFO valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
WIFI_SUPPLICANT_INFO=BASIC
|
||||
|
||||
#####################################
|
||||
# Location process launcher settings
|
||||
#####################################
|
||||
|
||||
# DO NOT MODIFY
|
||||
# Modifying below attributes without
|
||||
# caution can have serious implications.
|
||||
|
||||
#Values for PROCESS_STATE:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
|
||||
#Values for LOW_RAM_TARGETS:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property
|
||||
# to identify low ram targets.
|
||||
|
||||
#PROCESS_NAME
|
||||
# Name of the executable file.
|
||||
|
||||
#FEATURE MASKS:
|
||||
# GTP-WIFI 0X03
|
||||
# GTP-MP-CELL 0xc00
|
||||
# GTP-WAA 0x100
|
||||
# SAP 0Xc0
|
||||
# ODCPI 0x1000
|
||||
# FREE_WIFI_SCAN_INJECT 0x2000
|
||||
# SUPL_WIFI 0x4000
|
||||
# WIFI_SUPPLICANT_INFO 0x8000
|
||||
|
||||
#Values for PLATFORMS can be:
|
||||
#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
|
||||
#2. 'all' or 'all exclude' -> for All platforms
|
||||
#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
|
||||
|
||||
#Values for SOC_IDS can be:
|
||||
#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436
|
||||
## soc_id value can be obtained from any one of below node:
|
||||
## - /sys/devices/soc0/soc_id
|
||||
## - /sys/devices/system/soc/soc0/id
|
||||
#2. 'all' or 'all exclude' -> for All soc id's
|
||||
#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386
|
||||
|
||||
#Values for BASEBAND can be:
|
||||
#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
|
||||
#2. 'all' or 'all exclude' -> for all basebands
|
||||
#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
|
||||
PROCESS_NAME=lowi-server
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps wifi inet oem_2901
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0xf303
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
PROCESS_NAME=xtwifi-inet-agent
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xc03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtwifi-client
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=wifi inet gps system oem_2904
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xd03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=slim_daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtra-daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=ENABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
########################################
|
||||
# Engine Service which host DRE module #
|
||||
# To enable DRE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
########################################
|
||||
# Engine Service which host PPE module #
|
||||
# To enable PPE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
# and update process arugements #
|
||||
# with PPE library name #
|
||||
#PROCESS_ARGUMENT=PPE libepsimulator.so#
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=PPE libepsimulator.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
27
gps/etc/lowi.conf
Normal file
27
gps/etc/lowi.conf
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
|
||||
#
|
||||
# LOWI Config file - default
|
||||
#
|
||||
# GENERAL DESCRIPTION
|
||||
# This file contains the config params for LOWI
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# 2012-2013 Qualcomm Atheros, Inc.
|
||||
# All Rights Reserved.
|
||||
# Qualcomm Atheros Confidential and Proprietary.
|
||||
#
|
||||
# Export of this technology or software is regulated by the U.S. Government.
|
||||
# Diversion contrary to U.S. law prohibited.
|
||||
#=============================================================================*/
|
||||
|
||||
# X86 ONLY - UBUNTU:
|
||||
# Copy this file in the same directory where the executable is
|
||||
|
||||
# Log level
|
||||
# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
|
||||
LOWI_LOG_LEVEL = 4
|
||||
LOWI_USE_LOWI_LP = 0
|
||||
|
||||
179
gps/etc/sap.conf
Normal file
179
gps/etc/sap.conf
Normal file
|
|
@ -0,0 +1,179 @@
|
|||
################################
|
||||
# Sensor Settings
|
||||
################################
|
||||
#The following parameters are optional.
|
||||
#Internal defaults support MEMS sensors
|
||||
#native to most handset devices.
|
||||
#Device specific sensor characterization
|
||||
#for improved performance is possible as
|
||||
#described in SAP application notes.
|
||||
#GYRO_BIAS_RANDOM_WALK=
|
||||
#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 0
|
||||
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC=2
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
|
||||
SENSOR_GYRO_BATCHES_PER_SEC=2
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH=5
|
||||
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
|
||||
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
|
||||
|
||||
# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_CONTROL_MODE=2
|
||||
|
||||
# Bit mask used to define which sensor algorithms are used.
|
||||
# Setting each bit has the following definition:
|
||||
# 0x1 - DISABLE_INS_POSITIONING_FILTER
|
||||
# 0x0 - ENABLE_INS_POSITIONING_FILTER
|
||||
SENSOR_ALGORITHM_CONFIG_MASK=0x0
|
||||
|
||||
#Vehicle Network Provider configuration
|
||||
|
||||
#Service configuration strings
|
||||
#The number before colon in VN_X items defines version of the format of the rest of the string
|
||||
#VN_ACCEL_CFG=0:5
|
||||
#VN_GYRO_CFG=0:5.5
|
||||
#VN_ODOMETRY_CFG=0:2,4.5
|
||||
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
|
||||
#VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
VN_SPEED_CFG=1:777,0,0,1,3,1,0.002778,0,40,8,32,8
|
||||
VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
|
||||
#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
|
||||
#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-DWT configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
|
||||
#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
|
||||
#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
|
||||
#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
|
||||
|
||||
#####################################################################################
|
||||
# VNW service batching configuration strings #
|
||||
# VNW provider will initialize default type as Time based batching #
|
||||
# Each service batch value is configured to be 100 #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE #
|
||||
# is set to time based batching #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE #
|
||||
# is set to count based batching #
|
||||
# Uncomment and update batch time /sample count as per selected batching type #
|
||||
#####################################################################################
|
||||
# Batching type
|
||||
# 1 - Time based (default)
|
||||
# 2 - Count based
|
||||
VN_CFG_BATCH_TYPE=1
|
||||
|
||||
#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ACCEL_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GYRO_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ODOMETRY_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
|
||||
VN_SPEED_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GEAR_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_DWS_CFG_BATCH_VALUE=100
|
||||
####################################################################################
|
||||
|
||||
#Procesors clock ratio: AP and CAN bus microcontroller
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
VN_PROC_CLOCK_RATIO=1.0
|
||||
|
||||
################################################
|
||||
# QDR2-DWT OR QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_PROC_CLOCK_RATIO = 1.0
|
||||
|
||||
# Time source used by Sensor HAL
|
||||
# Setting this value controls accuracy of location sensor services.
|
||||
# 0 - Unknown
|
||||
# 1 - CLOCK_BOOTTIME
|
||||
# 2 - CLOCK_MONOTONIC
|
||||
# 3 - CLOCK_REALTIME
|
||||
# 4 - CLOCK_BOOTTIME using Alarm timer interface
|
||||
NDK_PROVIDER_TIME_SOURCE=1
|
||||
|
||||
# Sensor Batching Configuration
|
||||
# 0 - Time based
|
||||
# 1 - Fixed count based
|
||||
# 2 - Variable count based
|
||||
COUNT_BASED_BATCHING=1
|
||||
SYNC_ONCE=0
|
||||
|
||||
# Vehicle Network Data optimization
|
||||
# Default value: 0
|
||||
# Value 0x40000 - Speed(bit 18 eSLIM_SERVICE_VEHICLE_SPEED)
|
||||
# Value 0x80000 - Speed(bit 19 eSLIM_SERVICE_VEHICLE_DWS)
|
||||
# Value 0x100000 - Speed(bit 20 eSLIM_SERVICE_VEHICLE_GEAR)
|
||||
VN_ENABLE_DATA_OPTIMIZATION=0x100000
|
||||
|
||||
# Vehicle Network Data Routing time interval
|
||||
# This is applicable only if VN_ENABLE_DATA_OPTIMIZATION value is set
|
||||
# Default value: 5000 msec
|
||||
VN_DATA_ROUTING_TIME_INTERVAL_MSEC=3000
|
||||
|
||||
#Sensor HAL Provider Configuration HAL Library name including path
|
||||
################################################
|
||||
# #
|
||||
# Configuration for BMI 160 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=2
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for ASM330 Sensor #
|
||||
# #
|
||||
################################################
|
||||
SENSOR_TYPE=1
|
||||
SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for IAM20680 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=3
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for SMI130 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=4
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1
|
||||
78
gps/etc/xtwifi.conf
Normal file
78
gps/etc/xtwifi.conf
Normal file
|
|
@ -0,0 +1,78 @@
|
|||
#GTP AP Project client core config file
|
||||
#
|
||||
#GENERAL DESCRIPTION
|
||||
#This is used by client core
|
||||
#
|
||||
#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
|
||||
#All Rights Reserved.
|
||||
#Qualcomm Atheros Confidential and Proprietary.
|
||||
#
|
||||
#Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
#All Rights Reserved.
|
||||
#Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
##############################################################################
|
||||
# non-IOT devices configuration items #
|
||||
# For non-IOT devices, configure below configuration items #
|
||||
# according to the app note: 80-NK218-1 and remove the configuration items #
|
||||
# in section of "IOT devices configuration items". #
|
||||
##############################################################################
|
||||
|
||||
# ASN URI v2 to be used by some GTP AP modules that
|
||||
# need to run with ASN URI v2 protocol.
|
||||
XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2
|
||||
|
||||
# ASN URI v3 to be used by GTP AP modules that
|
||||
# can support ASN URI v3 protocol.
|
||||
XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3
|
||||
|
||||
# size, in bytes, of the cache on device
|
||||
SIZE_BYTE_TOTAL_CACHE = 5000000
|
||||
|
||||
##############################################################################
|
||||
# IOT devices configuration items #
|
||||
# For IOT devices, configure below configuration items #
|
||||
# according to the app note and remove the configuration items in section of #
|
||||
# "non-IOT devices configuration items". #
|
||||
##############################################################################
|
||||
|
||||
# ASN URI v3 to be used by GTP AP modules that
|
||||
# can support ASN URI v3 protocol.
|
||||
# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3
|
||||
|
||||
# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
|
||||
# for any GTP requests, instead notification is sent to Izat SDK.
|
||||
# WiFi crowdsourcing module is disabled.
|
||||
# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
|
||||
# for any GTP requests, instead notification is sent to Izat SDK.
|
||||
# WiFi crowdsourcing module is active, also accessed via Izat SDK.
|
||||
# GTP_AP_MODE = 4
|
||||
|
||||
# 1: MP cell features relies on GTP AP for either download or upload
|
||||
# 0: MP cell features does not rely on GTP AP
|
||||
# GTP_AP_NEEDED_BY_MP_CELL = 1
|
||||
|
||||
##############################################################################
|
||||
# Configuration items applicable to all devices #
|
||||
##############################################################################
|
||||
|
||||
# Log verbosity control for most of the GTP WiFi system, including native and
|
||||
# Java componenets
|
||||
# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100
|
||||
DEBUG_GLOBAL_LOG_LEVEL = 2
|
||||
|
||||
# this is used at the server side to distinguish uploads from different maker/model
|
||||
# default "Qualcomm"
|
||||
OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
|
||||
|
||||
# this is used at the server side to distinguish uploads from different maker/model
|
||||
# default "UNKNOWN"
|
||||
MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
|
||||
|
||||
##############################################################################
|
||||
# Qualcomm Network Location Provider config #
|
||||
##############################################################################
|
||||
|
||||
# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
|
||||
# Default is 25000 meters.
|
||||
LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
|
||||
|
|
@ -249,8 +249,13 @@ PRODUCT_PACKAGES += \
|
|||
|
||||
# GPS Config
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(COMMON_PATH)/gps/etc/apdr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/apdr.conf \
|
||||
$(COMMON_PATH)/gps/etc/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \
|
||||
$(COMMON_PATH)/gps/etc/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \
|
||||
$(COMMON_PATH)/gps/etc/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \
|
||||
$(COMMON_PATH)/gps/etc/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \
|
||||
$(COMMON_PATH)/gps/etc/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \
|
||||
$(COMMON_PATH)/gps/etc/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf \
|
||||
$(COMMON_PATH)/gps/etc/gnss_antenna_info.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss_antenna_info.conf \
|
||||
$(COMMON_PATH)/gps/etc/seccomp_policy/gnss@2.0-base.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/gnss@2.0-base.policy \
|
||||
$(COMMON_PATH)/gps/etc/seccomp_policy/gnss@2.0-xtra-daemon.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/gnss@2.0-xtra-daemon.policy \
|
||||
|
|
|
|||
Loading…
Reference in a new issue