diff --git a/wifi/WCNSS_qcom_cfg.ini b/wifi/WCNSS_qcom_cfg.ini index 7502411..7c4d35c 100644 --- a/wifi/WCNSS_qcom_cfg.ini +++ b/wifi/WCNSS_qcom_cfg.ini @@ -38,13 +38,8 @@ hostNSOffload=1 # 802.11n Protection flag gEnableApProt=1 -#ifndef VENDOR_EDIT -#Qiulei@PSW.CN.WiFi.Power.1116749,2017/09/22 -#Modify for wifi softap standby current -#gEnableApOBSSProt=1 -#else /* VENDOR_EDIT */ -gEnableApOBSSProt=0 -#endif /* VENDOR_EDIT */ +#Enable OBSS protection +gEnableApOBSSProt=1 #Enable/Disable UAPSD for SoftAP gEnableApUapsd=1 @@ -74,24 +69,14 @@ g11dSupportEnabled=0 g11hSupportEnabled=1 # DFS Master Capability -#ifndef VENDOR_EDIT -#Guotian.Wu@PSW.CN.WiFi.Basic.SoftAP.1190360, 2019/5/23, -#change for SoftAP cannot operate on DFS channel -#gEnableDFSMasterCap=1 -#else /* VENDOR_EDIT */ -gEnableDFSMasterCap=0 -#endif /* VENDOR_EDIT */ +gEnableDFSMasterCap=1 # ESE Support and fast transition EseEnabled=0 ImplicitQosIsEnabled=0 -#ifdef VENDOR_EDIT -#Botao.Cu@PSW.CN.WiFi.Connect.select.1064666, 2017/01/04, -#add for select 5G wifi preferentially -#gNeighborLookupThreshold=76 -#endif /* VENDOR_EDIT */ +gNeighborLookupThreshold=76 gNeighborScanChannelMinTime=20 gNeighborScanChannelMaxTime=30 gMaxNeighborReqTries=3 @@ -105,35 +90,7 @@ FastRoamEnabled=1 # terms of RSSI. Checking is disabled if set to Zero.Otherwise it will # use this value as to how better the RSSI of the new/roamable AP should # be for roaming -#ifndef VENDOR_EDIT -#Botao.Cu@PSW.CN.WiFi.Connect.roaming.1065694, 2016/07/06 -#modify for [C18]: modify the roaming value. -#RoamRssiDiff=5 -#else VENDOR_EDIT -RoamRssiDiff=8 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#Botao.Cu@PSW.CN.WiFi.Connect.select.1064666, 2017/01/04, -#add for select 5G wifi preferentially -gRoamPrefer5GHz=1 -gSelect5GHzMargin=5 - -#set roam_bad_rssi_thresh_offset_2g = 0, avoid background roaming roam from 2g to 5g -# RSSI threshold offset for 2G to 5G roam -roam_bad_rssi_thresh_offset_2g=0 -#endif /* VENDOR_EDIT */ - -#Add for dense roam -gtraffic_threshold=55 -groam_dense_rssi_thresh_offset=0 - -gNeighborLookupThreshold=80 -#add for roam scan diff -gRoamRescanRssiDiff=3 -#add for disable background scan roam -roam_bg_scan_client_bitmap=0 -#endif /* VENDOR_EDIT */ +RoamRssiDiff=5 # To enable, set gRoamIntraBand=1 (Roaming within band) # To disable, set gRoamIntraBand=0 (Roaming across band) @@ -199,12 +156,7 @@ gVhtChannelWidth=2 # Enable Generic Receive Offload # LRO and GRO are exclusive to each other # LRO support is deprecated on latest 4.9(SDM845) kernel -#ifndef VENDOR_EDIT -#Rongzheng.tang@PSW.CN.WiFi.Network.1389443, 2019/05/23 -#GROEnable=1 -#else -GROEnable=0 -#endif /* VENDOR_EDIT */ +GROEnable=1 #Data Inactivity Timeout when in powersave (in ms) gDataInactivityTimeout=200 @@ -220,15 +172,8 @@ gSetRxChainmask1x1=1 # Scan Timing Parameters # gPassiveMaxChannelTime=110 # gPassiveMinChannelTime=60 -#ifdef VENDOR_EDIT -#Botao.Cu@PSW.CN.WiFi.Connect.Scan.958144, 2017/04/20, -#Modify for enlarge scan result -#gActiveMaxChannelTime=40 -#gActiveMinChannelTime=20 -#else -gActiveMaxChannelTime=60 -gActiveMinChannelTime=40 -#endif /* VENDOR_EDIT */ +gActiveMaxChannelTime=40 +gActiveMinChannelTime=20 #If set to 0, MCC is not allowed. gEnableMCCMode=1 @@ -273,7 +218,8 @@ gMaxMediumTime = 6000 # 802.11K support gRrmEnable=1 - +#Enable Power Save offload +gEnablePowerSaveOffload=2 #Enable firmware uart print gEnablefwprint=0 @@ -493,13 +439,7 @@ gEnableNanSupport=1 genable_nan_datapath=1 ################ NAN feature set end ##################### -#ifndef VENDOR_EDIT -#Shimin.Jiang@PSW.CN.WiFi.Connect.Scan.1405517,2018/5/31 -#Modify for disable adaptive dwell scan mode -#adaptive_dwell_mode_enabled=1 -#else -adaptive_dwell_mode_enabled=0 -#endif /*VENDOR_EDIT*/ +adaptive_dwell_mode_enabled=1 hostscan_adaptive_dwell_mode=1 @@ -541,151 +481,6 @@ gcmp_enabled=0 gTxBFCsnValue=4 -#ifdef VENDOR_EDIT -#Pan.Zhang@PSW.CN.WiFi.Basic.Log.1072015, 2017/11/23, -#Add for enable Packet Log -gEnablePacketLog=1 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#genglin.lian@PSW.CN.WiFi.Connect.Scan.1975483, 2019/05/01, -# 0 - disable -# 1 - enable -#Disallow the beacons/probe resp from adjacent channels -allow_adj_chan_bcns=0 - -#Shimin.Jiang@PSW.CN.WiFi.Connect.dhcp.1037520, 2017/07/07, -#Add for some ap don't response to dhcp discovery paket with qos flag equals voice -arp_ac_category=0 -#Yadong.Hu@Connectivity.WiFi.Connect.disconnect.956254, 2017/04/20, -#Add for set value of kick out, 2047 means if DUT missed 2047 packets from AP, then disconnect -gDroppedPktDisconnectTh=2047 - -#Add for set value of beacon miss, 10 and 20 means 30 beacon miss,then maybe trigger disconnect -gRoamBmissFirstBcnt=10 -gRoamBmissFinalBcnt=20 - -#Xiao.Li@PSW.CN.WiFi.Network.internet.1445969, 2018/06/26, -#Modify for set min channel time and max channel time during SCO/eSCO -gActiveMinChannelTimeBtc=120 -gActiveMaxChannelTimeBtc=180 - -#Jie.Huang@PSW.CN.WiFi.AutoConnect.1882408 2019/03/13 -#Add for : bug 1882408 do not automatically connect strong signal hotspots -gEnableSNRMonitoring=0 - -#Yuan.Huang@PSW.CN.WiFi.Network.quality.1063633 2016/07/20, -#Add for optimize download performance in noisy env. -gEnableEdcaParams=0 -gEdcaVoCwmin=2 -gEdcaViCwmin=2 -gEdcaBkCwmin=2 -gEdcaBeCwmin=2 - -gEdcaVoCwmax=3 -gEdcaViCwmax=3 -gEdcaBkCwmax=3 -gEdcaBeCwmax=3 - -gEdcaVoAifs=0 -gEdcaViAifs=0 -gEdcaBkAifs=0 -gEdcaBeAifs=0 - -#Rongzheng.tang@Connectivity.Wifi.Network.1063609, 2017/03/30, -#Add for enable PER based roaming -# enabled for Tx and Rx traffic -gper_roam_enabled=3 - -# Mbps x 10 -gper_roam_high_rate_th=540 -gper_roam_low_rate_th =150 - -# high PER rate % for roaming scan triggered -gper_roam_th_percent=80 -gper_roam_rest_time=60 - -#Yuan.Huang@PSW.CN.WiFi.Network.internet.1064218, 2016/08/04, -#Modify for QQ message delays when DUT is asleep -rx_wakelock_timeout=250 -#endif /* VENDOR_EDIT */ - -#Rongzheng.tang@Connectivity.Wifi.Network.1031774, 2017/06/18 -#Add for disable active mode offload. -gActiveModeOffload=0 - -#Wei.Wang@PSW.CN.WiFi.Network.quality.1170942, 2017/12/04, -#disable qpower,to decrease ping delay and improve download speed -gEnablePowerSaveOffload=2 -#else /* VENDOR_EDIT */ -#gEnablePowerSaveOffload=1 - -#ifdef VENDOR_EDIT -#Qiulei@PSW.CN.WiFi.Power.1067360 2016/08/08 -#Add for : wifi hongbao ,Enable Host driver and above layers control the PS mechanism -isAndroidPsEn=1 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#Qiulei@PSW.CN.WiFi.Hardware.1132176, 2017/03/07 -#Add for 2.4G&5G MIMO config,2.4G SAP SISO -gVdevTypeNss_5g=21930 -gVdevTypeNss_2g=21930 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#Qiulei@PSW.CN.WiFi.Hardware.1065440, 2017/05/16 -#Add for show the max linkspeed -gReportMaxLinkSpeed=1 -gChannelBondingMode24GHz=0 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#Qiulei@PSW.CN.WiFi.Power.802254, 2016/07/20 -#Add for reduce ap sleep current -gApLinkMonitorPeriod = 25 -#endif - -#ifdef VENDOR_EDIT -#Min.Yi@PSW.CN.WiFi.Hardware.Power.1323750, 2018/03/21 -#Add for high current when download on 11B -g11bNumTxChains=1 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#Guotian.Wu@PSW.CN.WiFi.Hardware.OpCustomized.1123073, 2019/07/02 -#disable for CTS test fail -gEnableRTTSupport=0 -#endif /* VENDOR_EDIT */ - -#Yuan.Huang@PSW.CN.WiFi.Network.internet.1140781, 2017/11/03, -#Add for data stall detection -gEnableDataStallDetection=0 -#endif /* VENDOR_EDIT */ - -#ifndef VENDOR_EDIT -#Tao.Hui@PSW.CN.WiFi.Basic.Custom.1067549, 2018/01/02, -#Modify for country code JP soft ap cant got 5G list for bug:1194908 -gindoor_channel_support=1 -#endif /* VENDOR_EDIT */ - -#Yuanliu.Tang@PSW.CN.WiFi.Basic.Crash.1135753, 2017/05/27 -#Add for open walkround feature to avoid MTK AP crash,QC case2952499 -gForce1x1Exception=1 -#endif /* VENDOR_EDIT */ - -#ifdef VENDOR_EDIT -#Tao.Hui@PSW.CN.WiFi.Basic.Custom.1884719 2019/03/08 -#add for bdf fw rus -gEnableForceTargetAssert=1 -#endif /* VENDOR_EDIT */ - -#ifndef VENDOR_EDIT -#Guotian.Wu@PSW.CN.WiFi.Basic.SoftAP.1181662, 2019/05/31, -#fix EU JP band1 band4 issue -etsi_srd_chan_in_master_mode=1 -#endif /* VENDOR_EDIT */ - # etsi13_srd_chan_in_master_mode - Enable/disable ETSI SRD channels in # master mode PCL and ACS functionality # @Min: 0