From 9b215d2e09880ef1a0251eab55036839023924e5 Mon Sep 17 00:00:00 2001 From: GiaSen Date: Thu, 7 May 2020 12:53:27 +0200 Subject: [PATCH] kunlun2: nuke wcnss config --- device.mk | 4 - wifi/WCNSS_qcom_cfg.ini | 495 ---------------------------------------- 2 files changed, 499 deletions(-) delete mode 100644 wifi/WCNSS_qcom_cfg.ini diff --git a/device.mk b/device.mk index 8fd7659..b409e14 100644 --- a/device.mk +++ b/device.mk @@ -142,10 +142,6 @@ PRODUCT_PACKAGES += \ PRODUCT_PACKAGES += \ android.hardware.usb@1.0-service.lenovo_kunlun2 -# WiFi -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_PRODUCT)/vendor_overlay/$(PRODUCT_TARGET_VNDK_VERSION)/etc/wifi/WCNSS_qcom_cfg.ini - # WiFi Display PRODUCT_PACKAGES += \ libnl diff --git a/wifi/WCNSS_qcom_cfg.ini b/wifi/WCNSS_qcom_cfg.ini deleted file mode 100644 index 7c4d35c..0000000 --- a/wifi/WCNSS_qcom_cfg.ini +++ /dev/null @@ -1,495 +0,0 @@ -# This file allows user to override the factory -# defaults for the WLAN Driver - -# Enable IMPS or not -gEnableImps=1 - -# Enable BMPS or not -gEnableBmps=1 - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only -# 7 = 11b only 8 = 11ac only. -gDot11Mode=0 - -# Assigned MAC Addresses - This will be used until NV items are in place -# Each byte of MAC address is represented in Hex format as XX -Intf0MacAddress=000AF58989FF -Intf1MacAddress=000AF58989FE -Intf2MacAddress=000AF58989FD -Intf3MacAddress=000AF58989FC - -# UAPSD service interval for VO,VI, BE, BK traffic -InfraUapsdVoSrvIntv=0 -InfraUapsdViSrvIntv=0 -InfraUapsdBeSrvIntv=0 -InfraUapsdBkSrvIntv=0 - -# Flag to allow STA send AddTspec even when ACM is Off -gAddTSWhenACMIsOff=1 - -#Flag to enable HostARPOffload feature or not -hostArpOffload=1 - -#Flag to enable HostNSOffload feature or not -hostNSOffload=1 - -# 802.11n Protection flag -gEnableApProt=1 - -#Enable OBSS protection -gEnableApOBSSProt=1 - -#Enable/Disable UAPSD for SoftAP -gEnableApUapsd=1 - -# Fixed Rate -gFixedRate=0 - -# Maximum Tx power -# gTxPowerCap=30 - -# Fragmentation Threshold -# gFragmentationThreshold=2346 - -# RTS threshold -RTSThreshold=1048576 - -# Intra-BSS forward -gDisableIntraBssFwd=0 - -# WMM Enable/Disable -WmmIsEnabled=0 - -# 802.11d support -g11dSupportEnabled=0 - -# 802.11h support -g11hSupportEnabled=1 - -# DFS Master Capability -gEnableDFSMasterCap=1 - -# ESE Support and fast transition -EseEnabled=0 - -ImplicitQosIsEnabled=0 - -gNeighborLookupThreshold=76 -gNeighborScanChannelMinTime=20 -gNeighborScanChannelMaxTime=30 -gMaxNeighborReqTries=3 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 -FastRoamEnabled=1 - -# Check if the AP to which we are roaming is better than current AP in -# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will -# use this value as to how better the RSSI of the new/roamable AP should -# be for roaming -RoamRssiDiff=5 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) -gRoamIntraBand=0 - -#Short Guard Interval Enable/disable -gShortGI20Mhz=1 -gShortGI40Mhz=1 - -#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled -gAPAutoShutOff=0 - -#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec -gWlanAutoShutdown = 0 - -# Not used. -gApAutoChannelSelection=0 - -#Preferred band (both or 2.4 only or 5 only) -BandCapability=0 - -#Channel Bonding -gChannelBondingMode5GHz=1 - -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link -#is idle for last 10 seconds.) For both active and power save clients. - -#Power save clients: DUT set TIM bit from 10th second onwards and till client -#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. - -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not -#success still we try on 11th second if not tries on 12th and so on till 15th -#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any -#case DUT will detect client got removed in (10+5) seconds. -#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. - -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and -#it is period where we send NULL frame. -#gApLinkMonitorPeriod = 10 -#gGoLinkMonitorPeriod = 10 - -#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame -#are succeed to send or not. Hence total effective detection time is -# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) / -# (gApLinkMonitorPeriod + gApKeepAlivePeriod) -gGoKeepAlivePeriod = 20 -gApKeepAlivePeriod = 20 - -#If set will start with active scan after driver load, otherwise will start with -#passive scan to find out the domain -gEnableBypass11d=1 - -#If set to 0, will not scan DFS channels -gEnableDFSChnlScan=1 - -# Enable DFS channel roam -# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE -gAllowDFSChannelRoam=1 - -gVhtChannelWidth=2 - -# Enable Generic Receive Offload -# LRO and GRO are exclusive to each other -# LRO support is deprecated on latest 4.9(SDM845) kernel -GROEnable=1 - -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 - -# Set txchainmask and rxchainmask -# These parameters are used only if gEnable2x2 is 0 -# Valid values are 1,2 -# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. -# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. -gSetTxChainmask1x1=1 -gSetRxChainmask1x1=1 - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -# gPassiveMinChannelTime=60 -gActiveMaxChannelTime=40 -gActiveMinChannelTime=20 - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# MCC to SCC Switch mode: -# 0-Disable -# 1-Enable -# 2-Force SCC if same band, with SAP restart -# 3-Force SCC if same band, without SAP restart by sending (E)CSA -# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, -# without SAP restart by sending (E)CSA -gWlanMccToSccSwitchMode=3 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# 1=enable tx STBC; 0=disable -gEnableTXSTBC=1 - -# 1=enable rx LDPC; 0=disable -gEnableRXLDPC=1 - -#Enable/Disable Tx beamforming -gTxBFEnable=1 - -#Enable/Disable Tx beamformee in SAP mode -gEnableTxBFeeSAP=1 - -# Enable Tx beamforming in VHT20MHz -# Valid values are 0,1. If commented out, the default value is 0. -# 0=disable, 1=enable -gEnableTxBFin20MHz=1 - -#Enable/Disable SU Tx beamformer support. -gEnableTxSUBeamformer=1 - -gEnableFastRoamInConcurrency=1 - -#Maxium Channel time in msec -gMaxMediumTime = 6000 - -# 802.11K support -gRrmEnable=1 - -#Enable Power Save offload -gEnablePowerSaveOffload=2 - -#Enable firmware uart print -gEnablefwprint=0 - -# Firmware log mode -# Valid values are 0,1,2 -# 0=Disable, 1=WMI, 2=DIAG -gEnablefwlog=1 - -# Maximum Receive AMPDU size (VHT only. Valid values: -# 0->8k 1->16k 2->32k 3->64k 4->128k) -gVhtAmpduLenExponent=7 - -# Maximum MPDU length (VHT only. Valid values: -# 0->3895 octets, 1->7991 octets, 2->11454 octets) -gVhtMpduLen=2 - -# Maximum number of wow filters required -#gMaxWoWFilters=22 - -# WOW Enable/Disable. -# 0 - Disable both magic pattern match and pattern byte match. -# 1 - Enable magic pattern match on all interfaces. -# 2 - Enable pattern byte match on all interfaces. -# 3 - Enable both magic pattern and pattern byte match on all interfaces. -# Default value of gEnableWoW is 3. -# gEnableWoW=0 - -# Enable or Disable MCC Adaptive Scheduler at the FW -# 1=Enable (default), 0=Disable -gEnableMCCAdaptiveScheduler=1 - -#Enable or Disable p2p device address administered -isP2pDeviceAddrAdministrated=0 - -# Remove Overlap channel restriction -gEnableOverLapCh=0 - -#Enable VHT on 2.4Ghz -gEnableVhtFor24GHzBand=1 - -#Maximum number of offload peers supported -# gMaxOffloadPeers=2 - -# controlling the following offload patterns -# through ini parameter. Default value is 1 -# to disable set it to zero. ssdp = 0 -# Setup multicast pattern for mDNS 224.0.0.251, -# SSDP 239.255.255.250 and LLMNR 224.0.0.252 -ssdp=0 - -#Enable Memory Deep Sleep -gEnableMemDeepSleep=1 - -# Regulatory Setting; 0=STRICT; 1=CUSTOM -gRegulatoryChangeCountry=1 - -# RA filtering rate limit param, the current value would not -# help if the lifetime in RA is less than 3*60=3min. Then -# we need to change it, though it is uncommon. -# gRAFilterEnable=0 -gRArateLimitInterval=600 - -# Maximum number of concurrent connections -gMaxConcurrentActiveSessions=3 - -# Disable/Enable GreenAP -# 0 to disable, 1 to enable, default: 1 -gEnableGreenAp=0 - -# Radar PRI multiplier -gDFSradarMappingPriMultiplier=4 - -gPNOScanSupport=1 - -#Enable/Disable LPASS support -# 0 to disable, 1 to enable -gEnableLpassSupport=1 - -# Whether userspace country code setting shld have priority -gCountryCodePriority=1 - -# Enable(1)/Disable(0) SIFS burst -gEnableSifsBurst=1 - -# Enable or Disable Multi-user MIMO -# 1=Enable (default), 0=Disable -gEnableMuBformee=1 - -# Enable/Disable channel avoidance for SAP in SCC scenario -# 0 - disable -# 1 - enable -gSapSccChanAvoidance=0 - -# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode -gIbssTxSpEndInactivityTime=10 - -# Enable support for TDLS -# 0 - disable -# 1 - enable -gEnableTDLSSupport=1 - -# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall -# initiate TDLS Discovery towards a peer whenever setup criteria (throughput -# and RSSI) is met and then will initiate teardown when teardown criteria -# (idle packet count and RSSI) is met. -# 0 - disable -# 1 - enable -gEnableTDLSImplicitTrigger=1 - -# Enable TDLS External Control. That is, user space application has to -# first configure a peer MAC in wlan driver towards which TDLS is desired. -# Device will establish TDLS only towards those configured peers whenever -# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS -# when teardown criteria (idle packet count and RSSI) is met. However, -# device will accept TDLS connection if it is initiated from any other peer, -# even if that peer is not configured. -# 0 - disable -# 1 - enable -# For TDLS External Control, Implicit Trigger must also be enabled. -gTDLSExternalControl=1 - -# Enable support for TDLS off-channel operation -# 0 - disable -# 1 - enable -# TDLS off-channel operation will be invoked when there is only one -# TDLS connection. -gEnableTDLSOffChannel=1 - -# Enable or Disable Random MAC (Spoofing) -# 1=Enable, 0=Disable (default) -gEnableMacAddrSpoof=1 - -################ Datapath feature set Begin ################ -# Bus bandwidth threshold values in terms of number of packets -gBusBandwidthHighThreshold=2000 -gBusBandwidthMediumThreshold=500 -gBusBandwidthLowThreshold=150 - -# Bus bandwidth compute timeout value in ms -gBusBandwidthComputeInterval=100 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# VHT Tx/Rx MCS values for 2x2 -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gEnable2x2=1 -gVhtRxMCS2x2=2 -gVhtTxMCS2x2=2 - -#IPA config is a bit mask and following are the configurations. -#bit0 IPA Enable -#bit1 IPA PRE Filter enable -#bit2 IPv6 enable -#bit3 IPA Resource Manager (RM) enable -#bit4 IPA Clock scaling enable -#bit5 IPA uC ENABLE -#bit6 IPA uC STA ENABLE -#bit8 IPA Real Time Debugging -gIPAConfig=0x7d -gIPADescSize=800 - -# Enable/Disable RX full reorder offload -gReorderOffloadSupported=1 - -# Enable CE classification -# 1 - enable(default) 0 - disable -gCEClassifyEnable=1 - -# Enable Rx handling options -# Rx_thread=1 RPS=2(default for ROME) NAPI=5 -rx_mode=5 - -# Enable(Tx) fastpath for data traffic. -# 1 - enable(default) 0 - disable -gEnableFastPath=1 - -# This flag enables IP, TCP and UDP checksum offload -# 1 - enable(default) 0 - disable -gEnableIpTcpUdpChecksumOffload=1 - -# Enable TCP Segmentation Offload -# 1 - enable 0 - disable -TSOEnable=1 - -# Enable HT MPDU Density -# 4 for 2 micro sec -ght_mpdu_density=4 - -# Enable flow steering to enable multiple CEs for Rx flows. -# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. -# Parallel Rx paths. -# 1 - enable 0 - disable(default) -gEnableFlowSteering=1 - -# Time in microseconds after which a NAPI poll must yield -ce_service_max_yield_time=500 - -#Maximum number of HTT messages to be processed per NAPI poll -ce_service_max_rx_ind_flush=1 - -# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND -maxMSDUsPerRxInd=8 - -################ Datapath feature set End ################ - -################ NAN feature set start ################### - -# Enable NAN discovery (NAN 1.0) -# 1 - enable 0 - disable(default) -gEnableNanSupport=1 -genable_nan_datapath=1 -################ NAN feature set end ##################### - -adaptive_dwell_mode_enabled=1 - -hostscan_adaptive_dwell_mode=1 - -adapt_dwell_lpf_weight=80 - -adapt_dwell_wifi_act_threshold=10 - -enable_scoring_for_roam=1 - -oce_enable_probe_req_deferral=1 - -oce_enable_probe_req_rate=1 - -enable_esp_for_roam=1 -##################### Scoring Param ############### -esp_qbss_score_idx7_to_4=0000000A - -#Add another interface while driver load -gEnableConcurrentSTA=wlan1 - -#Enable Target Wake Time support -enable_twt=0 - -# This ini is used to set early stop scan. Early stop -#scan is a feature for roaming to stop the scans at -#an early stage as soon as we find a better AP to roam. -#This would make the roaming happen quickly. -gEnableEarlyStopScan=1 - -#This ini is used to increase/decrease PCL weightage in best candidate selection. -#If some APs are in PCL list, those AP will get addition weightage. -pcl_weightage=0 - -#Currently Firmware update the sequence number for each TID with -#because of security issues. But with this PN mechanism, throughput drop -#is observed. With this ini FW takes the decision to trade off between -#security and throughput -gcmp_enabled=0 - -gTxBFCsnValue=4 - -# etsi13_srd_chan_in_master_mode - Enable/disable ETSI SRD channels in -# master mode PCL and ACS functionality -# @Min: 0 -# @Max: 1 -# @Default: 0 -etsi13_srd_chan_in_master_mode=1 - -ignore_fw_reg_offload_ind=1 - -END - -# Note: Configuration parser would not read anything past the END marker